http://wiki.embroiderymachine.com/api.php?action=feedcontributions&user=72.13.81.228&feedformat=atomEmbroidery Machine WIKI - User contributions [en]2024-03-29T08:53:48ZUser contributionsMediaWiki 1.37.1http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Accessories&diff=1796Embroidery Machine Accessories2013-08-19T21:11:32Z<p>72.13.81.228: /* Hoops and Hooping */</p>
<hr />
<div>[[File:Embroidery-machine-hoops.jpg|thumb|right|alt=Various Accessories for a single head [[Butterfly]] embroidery machine|Various Accessories for a single head [[Butterfly]] embroidery machine]]<br />
<br />
There are several different types of '''Embroidery Machine Accessories'''. The Embroidery Machine Accessories are used for making it easier to embroider on different types of garments. For example, there are accessories for embroidering on caps and there are different accessories for embroidering jacket backs and different accessories for embroidery on shirt fronts.<br />
<br />
When embroidering on different materials, it might be necessary to change the needles. <br />
<br />
{{for|more info on Embroidery Needles|Embroidery Needles}}<br />
<br />
==Types of Embroidery Machine Accessories==<br />
[[File:embroidery_machine_stand.jpg|thumb|right|Single Head Embroidery Machine Stand|Single Head Embroidery Machine Stand]]<br />
[[File:Large_cap_system.jpg|thumb|right|Cap system for a Single Head Machine|Cap system for a Single Head Machine]]<br />
[[File:Smaller_hoops.jpg|thumb|right|alt=Tubular Embroidery Hoops about 12CM|Tubular Embroidery Hoops about 12CM]]<br />
<br />
There are a lot of Embroidery Machine Accessories one might use when embroidering on different types of garments or materials.<br />
<br />
The garment should be tight inside the hoop and the fibers or threads of the materials should all be seen running parallel and perpendicular to each other. In other words, the material needs to be flat and not be stretched one direction or another. <br />
<br />
Some of the common types of Embroidery Machine Accessories might include:<br />
<br />
;Hoops: There are several different types of hoops and hoop sizes. Generally its best to use the smallest hoop available for the logo and garment. Larger hoops for small embroidery might cause distortions. <br />
<br />
Some types of embroidery machine hoops include might include ''Tubular Hoops'', ''Spider Hoops'', ''Magnetic Hoops'', ''Jacket Back Hoops'', etc<br />
<br />
;Cap/Hat Frame: The Cap/Hat frame is used when embroidery on the front of a cap. To embroidery on the back of a cap, its recommended to use a tubular hoops. The Cap / Hat frame requires a cap/hat driver. The cap driver is specific for each make and model of machine. The cap frame attaches to the cap driver and the cap driver attaches to the machine. Cap frames are then placed and removed from the cap driver.<br />
<br />
{{notice| Depending on the machine, changing from one accessory to another (example: Caps to Tubular hoops) might take a little while, especially on large multihead machines. Some operators like to have specific days just for caps and other days just for shirts or, the morning for embroidering on caps and the afternoon for the tubular hoop goods.}}<br />
<br />
;Embroidery Machine Stands: Single head machines sometimes have optional Embroidery Machine Stands with a cut out in the front to allow garments to hang while embroidering. The stands usually also have wheels to roll around and leveling feet to level the machine and stand. It is very important that the stand remain level.<br />
<br />
{{for|more information on leveling a machine|Embroidery Machine Leveling}}<br />
<br />
==Hoops and Hooping==<br />
'''Embroidery hoops''' are clamping devices used to hold the backing and fabric in place when using the embroidery machine. Modern hoops for embroidery machines are typically made of plastic and metal. By placing the fabric in a hoop, the fabric stays in place and the hoop moves as controlled by the machine. Hooping the garment correctly is an important part of the embroidery process.<br />
<br />
===Types of Hoops===<br />
'''Tubular.''' The Tubular Hoops are the most popular or common types of hoops currently used. Tubular hoops systems are relatively new in the embroidery industry and were introduced in the early 1990s. When this type of hoop is used the machines workable table top is dropped or removed. Tubular hoops snap into a tubular sash and allow the fabric to flow freely. This makes it easier to embroider on finished garments. Tubular hoops are usually quick to load and unload and are usually easier to hoop which has made them very popular<br />
<br />
'''Flat.''' This type of hoop is used when the machine table is in the up position. There are special framing systems that allow you to load and unload these hoops with ease. Flat hoops are typically used for unfinished garments or fabric.<br />
<br />
===Hoop Sizes===<br />
Listed below are some common hoop sizes and their recommended usage:<br />
<br />
'''4-inch or 12cm round hoops.''' These hoops are used for small shirt-front or jacket-front embroidery such as personalization, hemmed sleeves, shorts and more.<br />
<br />
'''6-inch or 15cm round hoops.''' These hoops are commonly used for embroidery over shirt pockets because they allow the embroiderer to keep the bulky pocket seams inside the hoop. In other words, even when a logo or design will fit inside a four-inch hoop, the pocket area can be trooped straighter and flatter when the hoop falls outside the pocket corners. These hoops are also used for blazer crests, aprons and jackets.<br />
<br />
'''8-inch or 19cm round hoops.''' These hoops are most commonly used as a base to hold a spider or distancing insert for quick-change hooping systems. In this system, the hoop that holds the garment is snapped into (not screwed into) the spider which holds it <br />
<br />
===Selecting the Appropriate Hoop===<br />
'''Select the smallest hoop possible.''' Use the smallest hoop possible (that fits the design) in order to ensure that tension is even across the fabric. Make sure to leave at least a half-inch (1.27cm) on all sides of the design. This will enable good design registration.<br />
<br />
'''Select the right shape.''' Most hoops are round or oval so this is not usually a problem. The rounded shape provides for more even tension on the fabric.<br />
<br />
'''Use hoop of an appropriate material.''' Most hoops are made of plastic so this is not a major concern. Some are made of wood and there are some cap frames and specialty hoops that are made of metal. Special hoops made of wood called Double-Height hoops are used to hold heavy or slippery fabrics.<br />
<br />
===Care of Hoops===<br />
<br />
'''Hang up hoops when not in use.''' If they are left flat they can become warped or get chipped. Do not store in direct sunlight.<br />
<br />
'''Hold the metal bar to insert hoops.''' When inserting the hoops into the machine do not push the wood or plastic. Instead, hold the metal bar or brackets and insert into the machine.<br />
<br />
'''Mark the hoop.''' This way you can always keep the top and bottom pieces together.<br />
<br />
'''Adjusting screw.''' The small adjusting screw is usually the first item to break on plastic hoops. The adjusting screw can be tightened by hand or with pliers but be sure not to overtighten - it is bad for the garment and the hoop.<br />
<br />
===Guidelines for Hooping===<br />
<br />
'''Make sure the backing is large enough to fill the entire hoop.''' By hooping the entire piece of backing, you will better maintain even tension on the garment.<br />
<br />
'''Smooth out the garment and backing.''' Do this before placing the hoop and make sure there are no folds or wrinkles in the garment once it is hooped.<br />
<br />
'''Stretch the garment.''' Stretch the garment to how it will be worn before hooping it. If the garment stretches when it is worn, it will make the fabric around the embroidery look puckered.<br />
<br />
'''Adjust the hoop before hooping.''' Do not tighten the screw after hooping the garment or it may cause "hoop burn" on the garment or cause the design to register poorly.<br />
<br />
'''Marking the garment.''' Mark the garment with tailor's chalk, masking tape, straight pins or marking pens. This will help show you where the center of the design should start. If you are sewing many of the same garment you may be able to mark the first one, then use the hoop itself as a guideline for the remainder of the items to be embroidered.<br />
<br />
===Placement Guidelines===<br />
<br />
'''Left Chest.''' Center straight down from the shoulder seams 6-8" (15.2-20.3cm) and over 4-5" (10.1-12.7cm)<br />
<br />
'''Shirt Pockets.''' Center between the seams of the pocket down from the edge<br />
<br />
'''Jacket Backs.''' The center of the design should be about 6-9" (15.2-22.8cm) down from the collar<br />
<br />
==Cap / Hat Accessories==<br />
Most machines have the ability for embroidering on cap fronts<br />
<br />
==Basic Measurement Conversions==<br />
Below are a few of the English to Metric conversions for various common hoop sizes.<br />
<br />
Many of these measurements have been rounded.<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! English !! Metric<br />
|-<br />
| 0.394 Inch || 1 CM<br />
|-<br />
| 1 Inch || 2.54 CM<br />
|-<br />
| 3.54 Inch || 9 CM<br />
|-<br />
| 4.72 Inch || 12 CM<br />
|-<br />
| 5.90 Inch || 15 CM<br />
|}<br />
</center></div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Accessories&diff=1795Embroidery Machine Accessories2013-08-19T21:06:31Z<p>72.13.81.228: /* Hoops and Hooping */</p>
<hr />
<div>[[File:Embroidery-machine-hoops.jpg|thumb|right|alt=Various Accessories for a single head [[Butterfly]] embroidery machine|Various Accessories for a single head [[Butterfly]] embroidery machine]]<br />
<br />
There are several different types of '''Embroidery Machine Accessories'''. The Embroidery Machine Accessories are used for making it easier to embroider on different types of garments. For example, there are accessories for embroidering on caps and there are different accessories for embroidering jacket backs and different accessories for embroidery on shirt fronts.<br />
<br />
When embroidering on different materials, it might be necessary to change the needles. <br />
<br />
{{for|more info on Embroidery Needles|Embroidery Needles}}<br />
<br />
==Types of Embroidery Machine Accessories==<br />
[[File:embroidery_machine_stand.jpg|thumb|right|Single Head Embroidery Machine Stand|Single Head Embroidery Machine Stand]]<br />
[[File:Large_cap_system.jpg|thumb|right|Cap system for a Single Head Machine|Cap system for a Single Head Machine]]<br />
[[File:Smaller_hoops.jpg|thumb|right|alt=Tubular Embroidery Hoops about 12CM|Tubular Embroidery Hoops about 12CM]]<br />
<br />
There are a lot of Embroidery Machine Accessories one might use when embroidering on different types of garments or materials.<br />
<br />
The garment should be tight inside the hoop and the fibers or threads of the materials should all be seen running parallel and perpendicular to each other. In other words, the material needs to be flat and not be stretched one direction or another. <br />
<br />
Some of the common types of Embroidery Machine Accessories might include:<br />
<br />
;Hoops: There are several different types of hoops and hoop sizes. Generally its best to use the smallest hoop available for the logo and garment. Larger hoops for small embroidery might cause distortions. <br />
<br />
Some types of embroidery machine hoops include might include ''Tubular Hoops'', ''Spider Hoops'', ''Magnetic Hoops'', ''Jacket Back Hoops'', etc<br />
<br />
;Cap/Hat Frame: The Cap/Hat frame is used when embroidery on the front of a cap. To embroidery on the back of a cap, its recommended to use a tubular hoops. The Cap / Hat frame requires a cap/hat driver. The cap driver is specific for each make and model of machine. The cap frame attaches to the cap driver and the cap driver attaches to the machine. Cap frames are then placed and removed from the cap driver.<br />
<br />
{{notice| Depending on the machine, changing from one accessory to another (example: Caps to Tubular hoops) might take a little while, especially on large multihead machines. Some operators like to have specific days just for caps and other days just for shirts or, the morning for embroidering on caps and the afternoon for the tubular hoop goods.}}<br />
<br />
;Embroidery Machine Stands: Single head machines sometimes have optional Embroidery Machine Stands with a cut out in the front to allow garments to hang while embroidering. The stands usually also have wheels to roll around and leveling feet to level the machine and stand. It is very important that the stand remain level.<br />
<br />
{{for|more information on leveling a machine|Embroidery Machine Leveling}}<br />
<br />
==Hoops and Hooping==<br />
'''Embroidery hoops''' are clamping devices used to hold the backing and fabric in place when using the embroidery machine. Modern hoops for embroidery machines are typically made of plastic and metal. By placing the fabric in a hoop, the fabric stays in place and the hoop moves as controlled by the machine. Hooping the garment correctly is an important part of the embroidery process.<br />
<br />
===Types of Hoops===<br />
'''Tubular.''' This type of hoop is used when the machine working table is dropped or removed. Tubular hoops snap into a tubular sash and allow the fabric to flow freely. This makes it easier to embroider on finished garments.<br />
<br />
'''Flat.''' This type of hoop is used when the machine table is in the up position. There are special framing systems that allow you to load and unload these hoops with ease. Flat hoops are typically used for unfinished garments or fabric.<br />
<br />
===Hoop Sizes===<br />
Listed below are some common hoop sizes and their recommended usage:<br />
<br />
'''4-inch or 12cm round hoops.''' These hoops are used for small shirt-front or jacket-front embroidery such as personalization, hemmed sleeves, shorts and more.<br />
<br />
'''6-inch or 15cm round hoops.''' These hoops are commonly used for embroidery over shirt pockets because they allow the embroiderer to keep the bulky pocket seams inside the hoop. In other words, even when a logo or design will fit inside a four-inch hoop, the pocket area can be trooped straighter and flatter when the hoop falls outside the pocket corners. These hoops are also used for blazer crests, aprons and jackets.<br />
<br />
'''8-inch or 19cm round hoops.''' These hoops are most commonly used as a base to hold a spider or distancing insert for quick-change hooping systems. In this system, the hoop that holds the garment is snapped into (not screwed into) the spider which holds it <br />
<br />
===Selecting the Appropriate Hoop===<br />
'''Select the smallest hoop possible.''' Use the smallest hoop possible (that fits the design) in order to ensure that tension is even across the fabric. Make sure to leave at least a half-inch (1.27cm) on all sides of the design. This will enable good design registration.<br />
<br />
'''Select the right shape.''' Most hoops are round or oval so this is not usually a problem. The rounded shape provides for more even tension on the fabric.<br />
<br />
'''Use hoop of an appropriate material.''' Most hoops are made of plastic so this is not a major concern. Some are made of wood and there are some cap frames and specialty hoops that are made of metal. Special hoops made of wood called Double-Height hoops are used to hold heavy or slippery fabrics.<br />
<br />
===Care of Hoops===<br />
<br />
'''Hang up hoops when not in use.''' If they are left flat they can become warped or get chipped. Do not store in direct sunlight.<br />
<br />
'''Hold the metal bar to insert hoops.''' When inserting the hoops into the machine do not push the wood or plastic. Instead, hold the metal bar or brackets and insert into the machine.<br />
<br />
'''Mark the hoop.''' This way you can always keep the top and bottom pieces together.<br />
<br />
'''Adjusting screw.''' The small adjusting screw is usually the first item to break on plastic hoops. The adjusting screw can be tightened by hand or with pliers but be sure not to overtighten - it is bad for the garment and the hoop.<br />
<br />
===Guidelines for Hooping===<br />
<br />
'''Make sure the backing is large enough to fill the entire hoop.''' By hooping the entire piece of backing, you will better maintain even tension on the garment.<br />
<br />
'''Smooth out the garment and backing.''' Do this before placing the hoop and make sure there are no folds or wrinkles in the garment once it is hooped.<br />
<br />
'''Stretch the garment.''' Stretch the garment to how it will be worn before hooping it. If the garment stretches when it is worn, it will make the fabric around the embroidery look puckered.<br />
<br />
'''Adjust the hoop before hooping.''' Do not tighten the screw after hooping the garment or it may cause "hoop burn" on the garment or cause the design to register poorly.<br />
<br />
'''Marking the garment.''' Mark the garment with tailor's chalk, masking tape, straight pins or marking pens. This will help show you where the center of the design should start. If you are sewing many of the same garment you may be able to mark the first one, then use the hoop itself as a guideline for the remainder of the items to be embroidered.<br />
<br />
===Placement Guidelines===<br />
<br />
'''Left Chest.''' Center straight down from the shoulder seams 6-8" (15.2-20.3cm) and over 4-5" (10.1-12.7cm)<br />
<br />
'''Shirt Pockets.''' Center between the seams of the pocket down from the edge<br />
<br />
'''Jacket Backs.''' The center of the design should be about 6-9" (15.2-22.8cm) down from the collar<br />
<br />
==Cap / Hat Accessories==<br />
Most machines have the ability for embroidering on cap fronts<br />
<br />
==Basic Measurement Conversions==<br />
Below are a few of the English to Metric conversions for various common hoop sizes.<br />
<br />
Many of these measurements have been rounded.<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! English !! Metric<br />
|-<br />
| 0.394 Inch || 1 CM<br />
|-<br />
| 1 Inch || 2.54 CM<br />
|-<br />
| 3.54 Inch || 9 CM<br />
|-<br />
| 4.72 Inch || 12 CM<br />
|-<br />
| 5.90 Inch || 15 CM<br />
|}<br />
</center></div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Accessories&diff=1794Embroidery Machine Accessories2013-08-19T21:05:05Z<p>72.13.81.228: /* Types of Embroidery Machine Accessories */</p>
<hr />
<div>[[File:Embroidery-machine-hoops.jpg|thumb|right|alt=Various Accessories for a single head [[Butterfly]] embroidery machine|Various Accessories for a single head [[Butterfly]] embroidery machine]]<br />
<br />
There are several different types of '''Embroidery Machine Accessories'''. The Embroidery Machine Accessories are used for making it easier to embroider on different types of garments. For example, there are accessories for embroidering on caps and there are different accessories for embroidering jacket backs and different accessories for embroidery on shirt fronts.<br />
<br />
When embroidering on different materials, it might be necessary to change the needles. <br />
<br />
{{for|more info on Embroidery Needles|Embroidery Needles}}<br />
<br />
==Types of Embroidery Machine Accessories==<br />
[[File:embroidery_machine_stand.jpg|thumb|right|Single Head Embroidery Machine Stand|Single Head Embroidery Machine Stand]]<br />
[[File:Large_cap_system.jpg|thumb|right|Cap system for a Single Head Machine|Cap system for a Single Head Machine]]<br />
[[File:Smaller_hoops.jpg|thumb|right|alt=Tubular Embroidery Hoops about 12CM|Tubular Embroidery Hoops about 12CM]]<br />
<br />
There are a lot of Embroidery Machine Accessories one might use when embroidering on different types of garments or materials.<br />
<br />
The garment should be tight inside the hoop and the fibers or threads of the materials should all be seen running parallel and perpendicular to each other. In other words, the material needs to be flat and not be stretched one direction or another. <br />
<br />
Some of the common types of Embroidery Machine Accessories might include:<br />
<br />
;Hoops: There are several different types of hoops and hoop sizes. Generally its best to use the smallest hoop available for the logo and garment. Larger hoops for small embroidery might cause distortions. <br />
<br />
Some types of embroidery machine hoops include might include ''Tubular Hoops'', ''Spider Hoops'', ''Magnetic Hoops'', ''Jacket Back Hoops'', etc<br />
<br />
;Cap/Hat Frame: The Cap/Hat frame is used when embroidery on the front of a cap. To embroidery on the back of a cap, its recommended to use a tubular hoops. The Cap / Hat frame requires a cap/hat driver. The cap driver is specific for each make and model of machine. The cap frame attaches to the cap driver and the cap driver attaches to the machine. Cap frames are then placed and removed from the cap driver.<br />
<br />
{{notice| Depending on the machine, changing from one accessory to another (example: Caps to Tubular hoops) might take a little while, especially on large multihead machines. Some operators like to have specific days just for caps and other days just for shirts or, the morning for embroidering on caps and the afternoon for the tubular hoop goods.}}<br />
<br />
;Embroidery Machine Stands: Single head machines sometimes have optional Embroidery Machine Stands with a cut out in the front to allow garments to hang while embroidering. The stands usually also have wheels to roll around and leveling feet to level the machine and stand. It is very important that the stand remain level.<br />
<br />
{{for|more information on leveling a machine|Embroidery Machine Leveling}}<br />
<br />
==Hoops and Hooping==<br />
'''Embroidery hoops''' are clamping devices used to hold the backing and fabric in place when using the embroidery machine. Modern hoops for embroidery machines are typically made of plastic and metal. By placing the fabric in a hoop, the fabric stays in place and the hoop moves as controlled by the machine. Hooping the garment correctly is an important part of the embroidery process.<br />
<br />
===Hoop Sizes===<br />
<br />
Listed below are some common hoop sizes and their recommended usage:<br />
<br />
'''4-inch or 12cm round hoops.''' These hoops are used for small shirt-front or jacket-front embroidery such as personalization, hemmed sleeves, shorts and more.<br />
<br />
'''6-inch or 15cm round hoops.''' These hoops are commonly used for embroidery over shirt pockets because they allow the embroiderer to keep the bulky pocket seams inside the hoop. In other words, even when a logo or design will fit inside a four-inch hoop, the pocket area can be trooped straighter and flatter when the hoop falls outside the pocket corners. These hoops are also used for blazer crests, aprons and jackets.<br />
<br />
'''8-inch or 19cm round hoops.''' These hoops are most commonly used as a base to hold a spider or distancing insert for quick-change hooping systems. In this system, the hoop that holds the garment is snapped into (not screwed into) the spider which holds it <br />
<br />
===Selecting the Appropriate Hoop===<br />
'''Select the smallest hoop possible.''' Use the smallest hoop possible (that fits the design) in order to ensure that tension is even across the fabric. Make sure to leave at least a half-inch (1.27cm) on all sides of the design. This will enable good design registration.<br />
<br />
'''Select the right shape.''' Most hoops are round or oval so this is not usually a problem. The rounded shape provides for more even tension on the fabric.<br />
<br />
'''Use hoop of an appropriate material.''' Most hoops are made of plastic so this is not a major concern. Some are made of wood and there are some cap frames and specialty hoops that are made of metal. Special hoops made of wood called Double-Height hoops are used to hold heavy or slippery fabrics.<br />
<br />
===Types of Hoops===<br />
<br />
'''Tubular.''' This type of hoop is used when the machine table is dropped. Tubular hoops snap into a tubular sash and allow the fabric to flow freely. This makes it easier to embroider on finished garments.<br />
<br />
'''Flat.''' This type of hoop is used when the machine table is in the up position. There are special framing systems that allow you to load and unload these hoops with ease. Flat hoops are typically used for unfinished garments or fabric.<br />
<br />
'''Cap Frames.''' This type of hoop is used to embroider on caps. They are typically curved metal hoops made to hold caps in place.<br />
<br />
===Care of Hoops===<br />
<br />
'''Hang up hoops when not in use.''' If they are left flat they can become warped or get chipped. Do not store in direct sunlight.<br />
<br />
'''Hold the metal bar to insert hoops.''' When inserting the hoops into the machine do not push the wood or plastic. Instead, hold the metal bar or brackets and insert into the machine.<br />
<br />
'''Mark the hoop.''' This way you can always keep the top and bottom pieces together.<br />
<br />
'''Adjusting screw.''' The small adjusting screw is usually the first item to break on plastic hoops. The adjusting screw can be tightened by hand or with pliers but be sure not to overtighten - it is bad for the garment and the hoop.<br />
<br />
===Guidelines for Hooping===<br />
<br />
'''Make sure the backing is large enough to fill the entire hoop.''' By hooping the entire piece of backing, you will better maintain even tension on the garment.<br />
<br />
'''Smooth out the garment and backing.''' Do this before placing the hoop and make sure there are no folds or wrinkles in the garment once it is hooped.<br />
<br />
'''Stretch the garment.''' Stretch the garment to how it will be worn before hooping it. If the garment stretches when it is worn, it will make the fabric around the embroidery look puckered.<br />
<br />
'''Adjust the hoop before hooping.''' Do not tighten the screw after hooping the garment or it may cause "hoop burn" on the garment or cause the design to register poorly.<br />
<br />
'''Marking the garment.''' Mark the garment with tailor's chalk, masking tape, straight pins or marking pens. This will help show you where the center of the design should start. If you are sewing many of the same garment you may be able to mark the first one, then use the hoop itself as a guideline for the remainder of the items to be embroidered.<br />
<br />
===Placement Guidelines===<br />
<br />
'''Left Chest.''' Center straight down from the shoulder seams 6-8" (15.2-20.3cm) and over 4-5" (10.1-12.7cm)<br />
<br />
'''Shirt Pockets.''' Center between the seams of the pocket down from the edge<br />
<br />
'''Jacket Backs.''' The center of the design should be about 6-9" (15.2-22.8cm) down from the collar<br />
<br />
==Cap / Hat Accessories==<br />
Most machines have the ability for embroidering on cap fronts<br />
<br />
==Basic Measurement Conversions==<br />
Below are a few of the English to Metric conversions for various common hoop sizes.<br />
<br />
Many of these measurements have been rounded.<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! English !! Metric<br />
|-<br />
| 0.394 Inch || 1 CM<br />
|-<br />
| 1 Inch || 2.54 CM<br />
|-<br />
| 3.54 Inch || 9 CM<br />
|-<br />
| 4.72 Inch || 12 CM<br />
|-<br />
| 5.90 Inch || 15 CM<br />
|}<br />
</center></div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Accessories&diff=1793Embroidery Machine Accessories2013-08-19T21:00:56Z<p>72.13.81.228: /* Types of Embroidery Machine Accessories */</p>
<hr />
<div>[[File:Embroidery-machine-hoops.jpg|thumb|right|alt=Various Accessories for a single head [[Butterfly]] embroidery machine|Various Accessories for a single head [[Butterfly]] embroidery machine]]<br />
<br />
There are several different types of '''Embroidery Machine Accessories'''. The Embroidery Machine Accessories are used for making it easier to embroider on different types of garments. For example, there are accessories for embroidering on caps and there are different accessories for embroidering jacket backs and different accessories for embroidery on shirt fronts.<br />
<br />
When embroidering on different materials, it might be necessary to change the needles. <br />
<br />
{{for|more info on Embroidery Needles|Embroidery Needles}}<br />
<br />
==Types of Embroidery Machine Accessories==<br />
[[File:embroidery_machine_stand.jpg|thumb|right|Single Head Embroidery Machine Stand|Single Head Embroidery Machine Stand]]<br />
[[File:Large_cap_system.jpg|thumb|right|Cap system for a Single Head Machine|Cap system for a Single Head Machine]]<br />
[[File:Smaller_hoops.jpg|thumb|right|alt=Tubular Embroidery Hoops about 12CM|Tubular Embroidery Hoops about 12CM]]<br />
<br />
There are a lot of Embroidery Machine Accessories one might use when embroidering on different types of garments or materials.<br />
<br />
The garment should be tight inside the hoop and the fibers or threads of the materials should all be seen running parallel and perpendicular to each other. In other words, the material needs to be flat and not be stretched one direction or another. <br />
<br />
Some of the common types of Embroidery Machine Accessories might include:<br />
<br />
;Hoops: There are several different types of hoops and hoop sizes. Generally its best to use the smallest hoop available for the logo and garment. Larger hoops for small embroidery might cause distortions. <br />
<br />
Some types of embroidery machine hoops include might include ''Tubular Hoops'', ''Spider Hoops'', ''Magnetic Hoops'', ''Jacket Back Hoops'', etc<br />
<br />
;Cap/Hat Drivers:Cap/Hat Drivers of Frames are used when embroidery on the front of a cap. To embroidery on the back of a cap, its recommended to use a tubular hoops.<br />
<br />
{{notice| Depending on the machine, changing from one accessory to another (example: Caps to Tubular hoops) might take a little while, especially on large multihead machines. Some operators like to have specific days just for caps and other days just for shirts or, the morning for embroidering on caps and the afternoon for the tubular hoop goods.}}<br />
<br />
;Embroidery Machine Stands: Single head machines sometimes have optional Embroidery Machine Stands with a cut out in the front to allow garments to hang. The stands also generally have wheels to roll around and leveling feet to level the machine and stand. It is very important that the stand remain level.<br />
<br />
{{for|more information on leveling a machine|Embroidery Machine Leveling}}<br />
<br />
==Hoops and Hooping==<br />
'''Embroidery hoops''' are clamping devices used to hold the backing and fabric in place when using the embroidery machine. Modern hoops for embroidery machines are typically made of plastic and metal. By placing the fabric in a hoop, the fabric stays in place and the hoop moves as controlled by the machine. Hooping the garment correctly is an important part of the embroidery process.<br />
<br />
===Hoop Sizes===<br />
<br />
Listed below are some common hoop sizes and their recommended usage:<br />
<br />
'''4-inch or 12cm round hoops.''' These hoops are used for small shirt-front or jacket-front embroidery such as personalization, hemmed sleeves, shorts and more.<br />
<br />
'''6-inch or 15cm round hoops.''' These hoops are commonly used for embroidery over shirt pockets because they allow the embroiderer to keep the bulky pocket seams inside the hoop. In other words, even when a logo or design will fit inside a four-inch hoop, the pocket area can be trooped straighter and flatter when the hoop falls outside the pocket corners. These hoops are also used for blazer crests, aprons and jackets.<br />
<br />
'''8-inch or 19cm round hoops.''' These hoops are most commonly used as a base to hold a spider or distancing insert for quick-change hooping systems. In this system, the hoop that holds the garment is snapped into (not screwed into) the spider which holds it <br />
<br />
===Selecting the Appropriate Hoop===<br />
'''Select the smallest hoop possible.''' Use the smallest hoop possible (that fits the design) in order to ensure that tension is even across the fabric. Make sure to leave at least a half-inch (1.27cm) on all sides of the design. This will enable good design registration.<br />
<br />
'''Select the right shape.''' Most hoops are round or oval so this is not usually a problem. The rounded shape provides for more even tension on the fabric.<br />
<br />
'''Use hoop of an appropriate material.''' Most hoops are made of plastic so this is not a major concern. Some are made of wood and there are some cap frames and specialty hoops that are made of metal. Special hoops made of wood called Double-Height hoops are used to hold heavy or slippery fabrics.<br />
<br />
===Types of Hoops===<br />
<br />
'''Tubular.''' This type of hoop is used when the machine table is dropped. Tubular hoops snap into a tubular sash and allow the fabric to flow freely. This makes it easier to embroider on finished garments.<br />
<br />
'''Flat.''' This type of hoop is used when the machine table is in the up position. There are special framing systems that allow you to load and unload these hoops with ease. Flat hoops are typically used for unfinished garments or fabric.<br />
<br />
'''Cap Frames.''' This type of hoop is used to embroider on caps. They are typically curved metal hoops made to hold caps in place.<br />
<br />
===Care of Hoops===<br />
<br />
'''Hang up hoops when not in use.''' If they are left flat they can become warped or get chipped. Do not store in direct sunlight.<br />
<br />
'''Hold the metal bar to insert hoops.''' When inserting the hoops into the machine do not push the wood or plastic. Instead, hold the metal bar or brackets and insert into the machine.<br />
<br />
'''Mark the hoop.''' This way you can always keep the top and bottom pieces together.<br />
<br />
'''Adjusting screw.''' The small adjusting screw is usually the first item to break on plastic hoops. The adjusting screw can be tightened by hand or with pliers but be sure not to overtighten - it is bad for the garment and the hoop.<br />
<br />
===Guidelines for Hooping===<br />
<br />
'''Make sure the backing is large enough to fill the entire hoop.''' By hooping the entire piece of backing, you will better maintain even tension on the garment.<br />
<br />
'''Smooth out the garment and backing.''' Do this before placing the hoop and make sure there are no folds or wrinkles in the garment once it is hooped.<br />
<br />
'''Stretch the garment.''' Stretch the garment to how it will be worn before hooping it. If the garment stretches when it is worn, it will make the fabric around the embroidery look puckered.<br />
<br />
'''Adjust the hoop before hooping.''' Do not tighten the screw after hooping the garment or it may cause "hoop burn" on the garment or cause the design to register poorly.<br />
<br />
'''Marking the garment.''' Mark the garment with tailor's chalk, masking tape, straight pins or marking pens. This will help show you where the center of the design should start. If you are sewing many of the same garment you may be able to mark the first one, then use the hoop itself as a guideline for the remainder of the items to be embroidered.<br />
<br />
===Placement Guidelines===<br />
<br />
'''Left Chest.''' Center straight down from the shoulder seams 6-8" (15.2-20.3cm) and over 4-5" (10.1-12.7cm)<br />
<br />
'''Shirt Pockets.''' Center between the seams of the pocket down from the edge<br />
<br />
'''Jacket Backs.''' The center of the design should be about 6-9" (15.2-22.8cm) down from the collar<br />
<br />
==Cap / Hat Accessories==<br />
Most machines have the ability for embroidering on cap fronts<br />
<br />
==Basic Measurement Conversions==<br />
Below are a few of the English to Metric conversions for various common hoop sizes.<br />
<br />
Many of these measurements have been rounded.<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! English !! Metric<br />
|-<br />
| 0.394 Inch || 1 CM<br />
|-<br />
| 1 Inch || 2.54 CM<br />
|-<br />
| 3.54 Inch || 9 CM<br />
|-<br />
| 4.72 Inch || 12 CM<br />
|-<br />
| 5.90 Inch || 15 CM<br />
|}<br />
</center></div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Accessories&diff=1792Embroidery Machine Accessories2013-08-19T20:56:44Z<p>72.13.81.228: </p>
<hr />
<div>[[File:Embroidery-machine-hoops.jpg|thumb|right|alt=Various Accessories for a single head [[Butterfly]] embroidery machine|Various Accessories for a single head [[Butterfly]] embroidery machine]]<br />
<br />
There are several different types of '''Embroidery Machine Accessories'''. The Embroidery Machine Accessories are used for making it easier to embroider on different types of garments. For example, there are accessories for embroidering on caps and there are different accessories for embroidering jacket backs and different accessories for embroidery on shirt fronts.<br />
<br />
When embroidering on different materials, it might be necessary to change the needles. <br />
<br />
{{for|more info on Embroidery Needles|Embroidery Needles}}<br />
<br />
==Types of Embroidery Machine Accessories==<br />
[[File:embroidery_machine_stand.jpg|thumb|right|Single Head Embroidery Machine Stand|Single Head Embroidery Machine Stand]]<br />
[[File:Large_cap_system.jpg|thumb|right|Cap system for a Single Head Machine|Cap system for a Single Head Machine]]<br />
[[File:Smaller_hoops.jpg|thumb|right|alt=Tubular Embroidery Hoops about 12CM|Tubular Embroidery Hoops about 12CM]]<br />
<br />
There are a lot of Embroidery Machine Accessories one might use when embroidering on different types of garments or materials.<br />
<br />
The garment should be tight inside the hoop and the fibers or threads of the materials should all be seen running parallel and perpendicular to each other. In other words, the material needs to be flat and not be stretched one direction or another. <br />
<br />
Some of the common types of Embroidery Machine Accessories might include:<br />
<br />
;Hoops: There are several different types of hoops and hoop sizes. Generally its best to use the smallest hoop available for the logo and garment. Larger hoops for small embroidery might cause distortions. <br />
<br />
Some types of embroidery machine hoops include might include ''Tubular Hoops'', ''Spider Hoops'', ''Magnetic Hoops'', ''Jacket Back Hoops'', etc<br />
<br />
;Cap/Hat Drivers:Cap/Hat Drivers of Frames are used when embroidery on the front of a cap. To embroidery on the back of a cap, its recommended to use a tubular hoops.<br />
<br />
;Embroidery Machine Stands: Single head machines sometimes have optional Embroidery Machine Stands with a cut out in the front to allow garments to hang. The stands also generally have wheels to roll around and leveling feet to level the machine and stand. It is very important that the stand remain level.<br />
<br />
{{for|more information on leveling a machine|Embroidery Machine Leveling}}<br />
<br />
{{notice|Depending on the machine, changing from one accessory to another (example: Caps to Tubular hoops) might take a little while, especially on large multihead machines. Some operators like to have specific days just for caps and other days just for shirts or, the morning for embroidering on caps and the afternoon for the tubular hoop goods.}}<br />
<br />
==Hoops and Hooping==<br />
'''Embroidery hoops''' are clamping devices used to hold the backing and fabric in place when using the embroidery machine. Modern hoops for embroidery machines are typically made of plastic and metal. By placing the fabric in a hoop, the fabric stays in place and the hoop moves as controlled by the machine. Hooping the garment correctly is an important part of the embroidery process.<br />
<br />
===Hoop Sizes===<br />
<br />
Listed below are some common hoop sizes and their recommended usage:<br />
<br />
'''4-inch or 12cm round hoops.''' These hoops are used for small shirt-front or jacket-front embroidery such as personalization, hemmed sleeves, shorts and more.<br />
<br />
'''6-inch or 15cm round hoops.''' These hoops are commonly used for embroidery over shirt pockets because they allow the embroiderer to keep the bulky pocket seams inside the hoop. In other words, even when a logo or design will fit inside a four-inch hoop, the pocket area can be trooped straighter and flatter when the hoop falls outside the pocket corners. These hoops are also used for blazer crests, aprons and jackets.<br />
<br />
'''8-inch or 19cm round hoops.''' These hoops are most commonly used as a base to hold a spider or distancing insert for quick-change hooping systems. In this system, the hoop that holds the garment is snapped into (not screwed into) the spider which holds it <br />
<br />
===Selecting the Appropriate Hoop===<br />
'''Select the smallest hoop possible.''' Use the smallest hoop possible (that fits the design) in order to ensure that tension is even across the fabric. Make sure to leave at least a half-inch (1.27cm) on all sides of the design. This will enable good design registration.<br />
<br />
'''Select the right shape.''' Most hoops are round or oval so this is not usually a problem. The rounded shape provides for more even tension on the fabric.<br />
<br />
'''Use hoop of an appropriate material.''' Most hoops are made of plastic so this is not a major concern. Some are made of wood and there are some cap frames and specialty hoops that are made of metal. Special hoops made of wood called Double-Height hoops are used to hold heavy or slippery fabrics.<br />
<br />
===Types of Hoops===<br />
<br />
'''Tubular.''' This type of hoop is used when the machine table is dropped. Tubular hoops snap into a tubular sash and allow the fabric to flow freely. This makes it easier to embroider on finished garments.<br />
<br />
'''Flat.''' This type of hoop is used when the machine table is in the up position. There are special framing systems that allow you to load and unload these hoops with ease. Flat hoops are typically used for unfinished garments or fabric.<br />
<br />
'''Cap Frames.''' This type of hoop is used to embroider on caps. They are typically curved metal hoops made to hold caps in place.<br />
<br />
===Care of Hoops===<br />
<br />
'''Hang up hoops when not in use.''' If they are left flat they can become warped or get chipped. Do not store in direct sunlight.<br />
<br />
'''Hold the metal bar to insert hoops.''' When inserting the hoops into the machine do not push the wood or plastic. Instead, hold the metal bar or brackets and insert into the machine.<br />
<br />
'''Mark the hoop.''' This way you can always keep the top and bottom pieces together.<br />
<br />
'''Adjusting screw.''' The small adjusting screw is usually the first item to break on plastic hoops. The adjusting screw can be tightened by hand or with pliers but be sure not to overtighten - it is bad for the garment and the hoop.<br />
<br />
===Guidelines for Hooping===<br />
<br />
'''Make sure the backing is large enough to fill the entire hoop.''' By hooping the entire piece of backing, you will better maintain even tension on the garment.<br />
<br />
'''Smooth out the garment and backing.''' Do this before placing the hoop and make sure there are no folds or wrinkles in the garment once it is hooped.<br />
<br />
'''Stretch the garment.''' Stretch the garment to how it will be worn before hooping it. If the garment stretches when it is worn, it will make the fabric around the embroidery look puckered.<br />
<br />
'''Adjust the hoop before hooping.''' Do not tighten the screw after hooping the garment or it may cause "hoop burn" on the garment or cause the design to register poorly.<br />
<br />
'''Marking the garment.''' Mark the garment with tailor's chalk, masking tape, straight pins or marking pens. This will help show you where the center of the design should start. If you are sewing many of the same garment you may be able to mark the first one, then use the hoop itself as a guideline for the remainder of the items to be embroidered.<br />
<br />
===Placement Guidelines===<br />
<br />
'''Left Chest.''' Center straight down from the shoulder seams 6-8" (15.2-20.3cm) and over 4-5" (10.1-12.7cm)<br />
<br />
'''Shirt Pockets.''' Center between the seams of the pocket down from the edge<br />
<br />
'''Jacket Backs.''' The center of the design should be about 6-9" (15.2-22.8cm) down from the collar<br />
<br />
==Cap / Hat Accessories==<br />
Most machines have the ability for embroidering on cap fronts<br />
<br />
==Basic Measurement Conversions==<br />
Below are a few of the English to Metric conversions for various common hoop sizes.<br />
<br />
Many of these measurements have been rounded.<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! English !! Metric<br />
|-<br />
| 0.394 Inch || 1 CM<br />
|-<br />
| 1 Inch || 2.54 CM<br />
|-<br />
| 3.54 Inch || 9 CM<br />
|-<br />
| 4.72 Inch || 12 CM<br />
|-<br />
| 5.90 Inch || 15 CM<br />
|}<br />
</center></div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Accessories&diff=1791Embroidery Machine Accessories2013-08-19T20:54:42Z<p>72.13.81.228: </p>
<hr />
<div>[[File:Embroidery-machine-hoops.jpg|thumb|right|alt=Various Accessories for a single head [[Butterfly]] embroidery machine|Various Accessories for a single head [[Butterfly]] embroidery machine]]<br />
<br />
There are several different types of '''Embroidery Machine Accessories'''. The Embroidery Machine Accessories are used for making it easier to embroider on different types of garments. For example, there are accessories for embroidering on caps and there are different accessories for embroidering jacket backs and different accessories for embroidery on shirt fronts.<br />
<br />
When embroidering on different materials, it might be necessary to change the needles. <br />
<br />
{{for|more info on Embroidery Needles|Embroidery Needles}}<br />
<br />
==Types of Embroidery Machine Accessories==<br />
[[File:embroidery_machine_stand.jpg|thumb|right|Single Head Embroidery Machine Stand|Single Head Embroidery Machine Stand]]<br />
[[File:Large_cap_system.jpg|thumb|right|Cap system for a Single Head Machine|Cap system for a Single Head Machine]]<br />
[[File:Smaller_hoops.jpg|thumb|right|alt=Tubular Embroidery Hoops about 12CM|Tubular Embroidery Hoops about 12CM]]<br />
<br />
There are a lot of Embroidery Machine Accessories one might use when embroidering on different types of garments or materials.<br />
<br />
The garment should be tight inside the hoop and the fibers or threads of the materials should all be seen running parallel and perpendicular to each other. In other words, the material needs to be flat and not be stretched one direction or another. <br />
<br />
Some of the common types of Embroidery Machine Accessories might include:<br />
<br />
;Hoops: There are several different types of hoops and hoop sizes. Generally its best to use the smallest hoop available for the logo and garment. Larger hoops for small embroidery might cause distortions. <br />
<br />
Some types of embroidery machine hoops include might include ''Tubular Hoops'', ''Spider Hoops'', ''Magnetic Hoops'', ''Jacket Back Hoops'', etc<br />
<br />
;Cap/Hat Drivers:Cap/Hat Drivers of Frames are used when embroidery on the front of a cap. To embroidery on the back of a cap, its recommended to use a tubular hoops.<br />
<br />
;Embroidery Machine Stands: Single head machines sometimes have optional Embroidery Machine Stands with a cut out in the front to allow garments to hang. The stands also generally have wheels to roll around and leveling feet to level the machine and stand. It is very important that the stand remain level.<br />
<br />
{{for|more information on leveling a machine|Embroidery Machine Leveling}}<br />
<br />
{{notice|Depending on the machine, changing from one accessory to another (example: Caps to Tubular hoops) might take a little while, especially on large multihead machines. Some operators like to have specific days just for caps and other days just for shirts or, the morning for embroidering on caps and the afternoon for the tubular hoop goods.}}<br />
<br />
==Hoops and Hooping==<br />
'''Embroidery hoops''' are clamping devices used to hold the backing and fabric in place when using the embroidery machine. Modern hoops for embroidery machines are typically made of plastic and metal. By placing the fabric in a hoop, the fabric stays in place and the hoop moves as controlled by the machine. Hooping the garment correctly is an important part of the embroidery process.<br />
<br />
===Hoop Sizes===<br />
<br />
Listed below are some common hoop sizes and their recommended usage:<br />
<br />
'''4-inch or 12cm round hoops.''' These hoops are used for small shirt-front or jacket-front embroidery such as personalization, hemmed sleeves, shorts and more.<br />
<br />
'''6-inch or 15cm round hoops.''' These hoops are commonly used for embroidery over shirt pockets because they allow the embroiderer to keep the bulky pocket seams inside the hoop. In other words, even when a logo or design will fit inside a four-inch hoop, the pocket area can be trooped straighter and flatter when the hoop falls outside the pocket corners. These hoops are also used for blazer crests, aprons and jackets.<br />
<br />
'''8-inch or 19cm round hoops.''' These hoops are most commonly used as a base to hold a spider or distancing insert for quick-change hooping systems. In this system, the hoop that holds the garment is snapped into (not screwed into) the spider which holds it <br />
<br />
===Selecting the Appropriate Hoop===<br />
'''Select the smallest hoop possible.''' Use the smallest hoop possible (that fits the design) in order to ensure that tension is even across the fabric. Make sure to leave at least a half-inch (1.27cm) on all sides of the design. This will enable good design registration.<br />
<br />
'''Select the right shape.''' Most hoops are round or oval so this is not usually a problem. The rounded shape provides for more even tension on the fabric.<br />
<br />
'''Use hoop of an appropriate material.''' Most hoops are made of plastic so this is not a major concern. Some are made of wood and there are some cap frames and specialty hoops that are made of metal. Special hoops made of wood called Double-Height hoops are used to hold heavy or slippery fabrics.<br />
<br />
===Types of Hoops===<br />
<br />
'''Tubular.''' This type of hoop is used when the machine table is dropped. Tubular hoops snap into a tubular sash and allow the fabric to flow freely. This makes it easier to embroider on finished garments.<br />
<br />
'''Flat.''' This type of hoop is used when the machine table is in the up position. There are special framing systems that allow you to load and unload these hoops with ease. Flat hoops are typically used for unfinished garments or fabric.<br />
<br />
'''Cap Frames.''' This type of hoop is used to embroider on caps. They are typically curved metal hoops made to hold caps in place.<br />
<br />
===Care of Hoops===<br />
<br />
'''Hang up hoops when not in use.''' If they are left flat they can become warped or get chipped. Do not store in direct sunlight.<br />
<br />
'''Hold the metal bar to insert hoops.''' When inserting the hoops into the machine do not push the wood or plastic. Instead, hold the metal bar or brackets and insert into the machine.<br />
<br />
'''Mark the hoop.''' This way you can always keep the top and bottom pieces together.<br />
<br />
'''Adjusting screw.''' The small adjusting screw is usually the first item to break on plastic hoops. The adjusting screw can be tightened by hand or with pliers but be sure not to overtighten - it is bad for the garment and the hoop.<br />
<br />
===Guidelines for Hooping===<br />
<br />
'''Make sure the backing is large enough to fill the entire hoop.''' By hooping the entire piece of backing, you will better maintain even tension on the garment.<br />
<br />
'''Smooth out the garment and backing.''' Do this before placing the hoop and make sure there are no folds or wrinkles in the garment once it is hooped.<br />
<br />
'''Stretch the garment.''' Stretch the garment to how it will be worn before hooping it. If the garment stretches when it is worn, it will make the fabric around the embroidery look puckered.<br />
<br />
'''Adjust the hoop before hooping.''' Do not tighten the screw after hooping the garment or it may cause "hoop burn" on the garment or cause the design to register poorly.<br />
<br />
'''Marking the garment.''' Mark the garment with tailor's chalk, masking tape, straight pins or marking pens. This will help show you where the center of the design should start. If you are sewing many of the same garment you may be able to mark the first one, then use the hoop itself as a guideline for the remainder of the items to be embroidered.<br />
<br />
===Placement Guidelines===<br />
<br />
'''Left Chest.''' Center straight down from the shoulder seams 6-8" (15.2-20.3cm) and over 4-5" (10.1-12.7cm)<br />
<br />
'''Shirt Pockets.''' Center between the seams of the pocket down from the edge<br />
<br />
'''Jacket Backs.''' The center of the design should be about 6-9" (15.2-22.8cm) down from the collar<br />
<br />
==Basic Measurement Conversions==<br />
Below are a few of the English to Metric conversions for various common hoop sizes.<br />
<br />
Many of these measurements have been rounded.<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! English !! Metric<br />
|-<br />
| 0.394 Inch || 1 CM<br />
|-<br />
| 1 Inch || 2.54 CM<br />
|-<br />
| 3.54 Inch || 9 CM<br />
|-<br />
| 4.72 Inch || 12 CM<br />
|-<br />
| 5.90 Inch || 15 CM<br />
|}<br />
</center></div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Machine_Thread&diff=1746Embroidery Machine Thread2013-08-17T21:08:06Z<p>72.13.81.228: </p>
<hr />
<div>There are many types of thread that can be used to create embroidery for various applications.<br />
<br />
All thread is a natural or ecru color and is dyed. White thread is bleached. Bleaching sometimes makes the thread fragile and weak and may cause thread breaks. Black thread is sometimes dyed twice and this will cause the thread to become weak.<br />
<br />
===Common Types of Thread===<br />
<br />
====Rayon====<br />
• Rayon thread has a high sheen which makes it an attractive, eye-catching choice for embroidery<br />
• It is available in many colors<br />
• Easily breaks by hand for trimming while sewing<br />
• Washable, dry cleanable and mostly colorfast<br />
<br />
====Polyester====<br />
• Available in high sheen<br />
• Much stronger, more durable thread that results in less thread breaks<br />
• Washable, dry cleanable, very colorfast, less expensive, will withstand bleaching<br />
• Use for items that will be subjected to excessive sunlight, wear or bleaching<br />
• Tendency to stretch and loop. May require adjustment of check spring¶<br />
<br />
====Acrylic====<br />
• Similar to polyester in appearance and handling<br />
• Slightly stiffer than rayon<br />
• Cut the thread at an angle so that you prevent fraying of the different plies of thread<br />
<br />
====Cotton====<br />
• Low sheen<br />
• Easily breaks by hand<br />
• Dry cleanable, colorfast<br />
• Special care in the cleaning of the embroidery machine is required since cotton thread produces more lint fibers<br />
• Preferred by many for low luster fabrics such as towels and shirts<br />
<br />
====Neon====<br />
• High sheen and glowing<br />
• Available in both rayon and polyester<br />
• Washable, dry cleanable, and colorfast<br />
• Use for specialty applications<br />
<br />
====Metallic====<br />
• Color selection will be limited<br />
• Dry cleanable<br />
• It is made of a nylon or rayon core and has the metallic thread wrapped around it<br />
• Thicker than average thread and is very coarse<br />
• Texture of this thread causes more friction than usual (which can result in thread breaks)<br />
<br />
===Thread upkeep and Shelve Life===<br />
Thread should be kept out of the sunlight to prevent the color from fading and the thread from drying. The best way to store thread is to keep it in a bag. This helps to prevent the thread from drying out.<br />
<br />
Thread should also be kept out of extreme temperatures and weather. The inside of the cone can become like a compost pile and age much faster than the outer layer. This will lead to thread rot. Once the thread begins to rot it will break very easy. Before putting thread on an embroidery machine, one should inspect the thread by seeing how easy it breaks and what the ends look like when it breaks. A bad cone of thread is worthless and should be thrown away. A good spool of thread costs much less than hourly labor or changing thread breaks.</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Shipping_Procedure_for_Crates_and_Pallets_(small_machines)&diff=1290Shipping Procedure for Crates and Pallets (small machines)2013-08-13T13:30:33Z<p>72.13.81.228: </p>
<hr />
<div>The following '''Shipping Procedure for Crates and Pallets (small machines)''' can be used when transporting small equipment.<br />
<br />
To ensure the machine purchased by TheEmbroideryWarehouse arrives in perfect condition,<br />
<br />
please follow these simple instructions and sign below.<br />
*Package all the accessories in boxes. Tape the boxes and label the boxes with our contact<br />
info.<br />
*Crate the machine or place it on the palate with all the accessories.<br />
*Put stretch film or plastic to protect the machine from the weather or other merchandise<br />
that is on the truck.<br />
*Strap the machine to the palette or the crate so it does not shift when the truck is moving.<br />
*Take a picture of the crate or pallet and send it to intlsales (At) tewh com<br />
*Ask the driver to sign the BL and send it by fax to 817-223-4462</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Shipping_Procedure_for_Crates_and_Pallets_(small_machines)&diff=1289Shipping Procedure for Crates and Pallets (small machines)2013-08-13T13:29:46Z<p>72.13.81.228: </p>
<hr />
<div>The following '''Shipping Procedure for Crates and Pallets (small machines)''' can be used when transporting small equipment.<br />
<br />
To ensure the machine purchased by TheEmbroideryWarehouse arrives in perfect condition,<br />
<br />
please follow these simple instructions and sign below.<br />
*Package all the accessories in boxes. Tape the boxes and label the boxes with our contact<br />
info.<br />
*Crate the machine or place it on the palate with all the accessories.<br />
*Put stretch film or plastic to protect the machine from the weather or other merchandise<br />
that is on the truck.<br />
*Strap the machine to the palette or the crate so it does not shift when the truck is moving.<br />
*Take a picture of the crate or pallet and send it to intlsales@tewh.com<br />
*Ask the driver to sign the BL and send it by fax to 817-223-4462</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Shipping_Procedure_for_Crates_and_Pallets_(small_machines)&diff=1282Shipping Procedure for Crates and Pallets (small machines)2013-08-12T18:02:32Z<p>72.13.81.228: Created page with "Shipping Procedure for Crates and Pallets (small machines)"</p>
<hr />
<div>Shipping Procedure for Crates and Pallets (small machines)</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Industrial/Commercial_Embroidery_Machine&diff=1094Industrial/Commercial Embroidery Machine2013-08-07T23:09:50Z<p>72.13.81.228: </p>
<hr />
<div>[[File:Butterfly_1201_embroidery.jpg |thumb|right|alt=Example picture of a commercial or industrial Butterfly embroidery machine|Example picture of a commercial or industrial [[Butterfly]] embroidery machine]] An '''Industrial or Commercial Embroidery Machine''' is an embroidery machine designed for production, or commercial embroidery. An industrial embroidery machine generally has more than one needle where each needle is used for a different colored thread. An industrial or commercial embroidery machine is different from a home or family type machine. Generally Home or Family machines have only one needle or, are more plastic based. Industrial machines run much faster than home machines and are built much more durable for production work.<br />
<br />
Examples of Home or Family machines include Bernina, Janome, etc. Examples of commercial embroidery equipment includes Tajima, Barudan, SWF, Melco, Toyota, Brother. Note, that Brother also makes home and family machines.<br />
<br />
[[File:janome.jpg |thumb|left|alt=Example of a home embroidery machine|Example of a home embroidery machine]]<br />
<br />
Industrial embroidery machines require that the files be [[digitized]] on a computer and then uploaded to the embroidery machine as a data file. The data file includes information on each single stitch and the direction the machine needs to move to make the stitch. In the data file there are also all the commands such as the needle up commands to make the machine lift the needle up without sewing, trims, color changes, etc.<br />
<br />
<br />
[[File:270_cap_system.jpg |thumb|right|alt=Machine setup with the 270 caps attachment|Machine setup with the 270 caps attachment]]<br />
==Accessories & Attachments==<br />
Embroidery machines use several types of [[Embroidery Accessories]] for creating embroidered goods, or making life easier on the operator.<br />
<br />
==Brands of Commercial Embroidery Equipment==<br />
There are several different major commercial embroidery machine companies across the USA. These same models are generally popular across the entire world wherever production embroidery is done. The most well known models include:<br />
<br />
*[[Barudan]]<br />
*[[Brother]]<br />
*[[ButterFly]]<br />
*[[Happy]]<br />
*[[Melco]]<br />
*[[SWF]]<br />
*[[Tajima]]<br />
*[[Toyota]]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Industrial/Commercial_Embroidery_Machine&diff=1093Industrial/Commercial Embroidery Machine2013-08-07T23:07:03Z<p>72.13.81.228: </p>
<hr />
<div>[[File:Butterfly_1201_embroidery.jpg |thumb|right|alt=Example picture of a commercial or industrial Butterfly embroidery machine|Example picture of a commercial or industrial [[Butterfly]] embroidery machine]] An '''Industrial or Commercial Embroidery Machine''' is an embroidery machine designed for production, or commercial embroidery. An industrial embroidery machine generally has more than one needle where each needle is used for a different colored thread. An industrial or commercial embroidery machine is different from a home or family type machine. Generally Home or Family machines have only one needle or, are more plastic based. Industrial machines run much faster than home machines and are built much more durable for production work.<br />
<br />
Examples of Home or Family machines include Bernina, Janome, etc. Examples of commercial embroidery equipment includes Tajima, Barudan, SWF, Melco, Toyota, Brother. Note, that Brother also makes home and family machines.<br />
<br />
[[File:janome.jpg |thumb|left|alt=Example of a home embroidery machine|Example of a home embroidery machine]]<br />
<br />
Industrial embroidery machines require that the files be [[digitized]] on a computer and then uploaded to the embroidery machine as a data file. The data file includes information on each single stitch and the direction the machine needs to move to make the stitch. In the data file there are also all the commands such as the needle up commands to make the machine lift the needle up without sewing, trims, color changes, etc.<br />
<br />
==Accessories==<br />
Embroidery machines use several types of [[Embroidery Accessories]] for creating embroidered goods, or making life easier on the operator.<br />
<br />
==Brands of Commercial Embroidery Equipment==<br />
There are several different major commercial embroidery machine companies across the USA. These same models are generally popular across the entire world wherever production embroidery is done. The most well known models include:<br />
<br />
*[[Barudan]]<br />
*[[Brother]]<br />
*[[ButterFly]]<br />
*[[Happy]]<br />
*[[Melco]]<br />
*[[SWF]]<br />
*[[Tajima]]<br />
*[[Toyota]]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_Accessories&diff=1091Embroidery Accessories2013-08-07T23:05:12Z<p>72.13.81.228: Created page with "Hoops tubular, etc 270 caps, standard caps stands spider frames/hoops"</p>
<hr />
<div>Hoops tubular, etc<br />
270 caps, standard caps<br />
stands<br />
spider frames/hoops</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Tajima&diff=1090Tajima2013-08-07T22:59:03Z<p>72.13.81.228: /* TME-HC Specifications */</p>
<hr />
<div>{{Infobox machineInfo<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyDesc = Tajima Embroidery Machine<br />
| embHeadQuarters = Japan<br />
| embWebSite = http://www.Tajima.com<br />
| yearsActive = 1944 - Present<br />
| yearsMachines = 1964 - Present<br />
}}<br />
<br />
'''Tajima''' is a distributor of single and multi-head [[embroidery machines]]. The Tajima embroidery machine company is based out of Japan. Tajima is one of the most popular embroidery machine companies in the world. The early model Tajimas produced till around 1996 were more green color based. Around the mid 1996's Tajima changed from the light green color scheme with dark green logo to, their more common white color scheme with a green, pink and blue logo. Tokai Industrial Sewing Machines Co. LTD was the original manufactures of the machines distributed by Tajima.<br />
<br />
Tajima has produced embroidery machines with 1, 2, 4, 6, 8, 10, 12, 15, 20 and 24 heads. In The United States most all Tajima models are 1, 2, 4, 6 and 12 head. Most the 8 head machines and machines larger than 12 heads were more common in other countries. Very few 8 heads can be found in the United States but are much more common in Asian countries. Tajima has produced machines with 1, 3, 4, 6, 9, 12 and 15 needles. Machines with 6 needles are common in the very early 1990s. 9 needle machines became popular during the mid 1990s. Late 1990s to around 2010 most machines were 12 needles. 15 needle machines are standard now. Tajima machines with less than 6 needles are generally specialty machines.<br />
<br />
==History, origin and sales==<br />
The Tajima embroidery machine company rose to popularity in the United States between the very late 1980s and the very early 1990s. Along with the Barudan embroidery machine, Tajima was one of the top 2 embroidery machines nationwide in the USA. Both Barudan and Tajima remain to be the two most popular models in the United States for production embroidery usage.<br />
<br />
Tajima continues to lead sales in most of the west and south of the USA whereas Barudan leads sales in the north and east. Most of the rest of the United States is evenly divided among the two major embroidery machines (Tajima and Barudan). Tajimas are more commonly seen around Mexico and most of Central America whereas Barudan tends to lead sales in countries such as Colombia, Peru, Venezuela. Countries such as Argentina, Canada, Brazil, and Chile are divided among both Tajima and Barudan for popularity rights.<br />
<br />
Tajimas machines original ran off paper punch cards from the 1970s till the 1980s when they were replaced by paper tape. Paper tape was soon replaced by floppy drives. Most all Tajima machines today are now run off USB drives.<br />
<br />
==Other Equipment==<br />
In addition to Tajima producing single and multi-head embroidery machines, Tajima also produces chenille machines, and machines with sequin devices.<br />
<br />
==Software Extensions==<br />
Tajima DST (.dst) is the most common software extension for Tajima software and machines. However, Tajima uses several other [[embroidery software formats]]. Tajima DST is the most common embroidery format found.<br />
<br />
==Embroidery Machines==<br />
{{Infobox machineType<br />
| embSeries = TMFX/TMEX-C<br />
| embName = Tajima<br />
| embCompanyImage = Tmfx-c902.jpg <br />
| embCompanyImageDesc = An early model TMFX-C902 machine<br />
| embSeriesYears = 1990 - 20xx<br />
| embSeriesHeads = 1, 2, 4, 6, 8<br />
| embSeriesNeedles = 9, 12, 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TMEX-C / TMFX Series===<br />
[[File:Tmfx_usb2.jpg |thumb|left|alt=Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed|Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed]]<br />
The Tajima TMFX model has been one of the longest produced models of the Tajima embroidery machine series. <br />
<br />
{{for|the Tajima TMFX machine electronics info|Tajima TMFX Electronics}}<br />
<br />
''For the Tajima TMFX user manual see [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php Tajima TMFX User Manual]''<br />
<br />
Tajima claims the TMEX-C machine was The World First with Wide Cap Frame. ''"The WORLD FIRST! The wide cap frame drastically expands your embroidery repertoire to include everything from designs on the front of the cap to designs that extends to the wide panels. It opens up unlimited possibilities for creative cap embroidery and for significant imporments in added value."''<br />
<br />
A very small percentage (less than 5%) of the TMFX and TMEX machines used narrow height floppy disk drives. The narrow height floppy disk drives have long been discontinued. Only regular sized floppy drives and floppy to USB drives can be used to replace the old 3 1/2 floppy drives on these machines. This means a very few amount of the TMFX control panels must be slight enlarged at the floppy drive port when accommodating these newer style drives.<br />
<br />
The Tajima TMFX and TMEX share very similar, almost identical, control panels.<br />
<br />
====1990-20xx====<br />
In 1990 Tajima released the TMFX series embroidery machine. The TMFX models came in both single head and multi-head versions. The first TMFX model was the TMFX-C901 model which was a nine needle single head embroidery machine. The machine had automatic color change and automatic trimmers. The single head and dual head models both had removable bases. <br />
<br />
====1995====<br />
In 1995 Tajima released the TMEX-C embroidery machine. The TMEX-C was designed to replace the single head TMFX model.<br />
<br />
Tajima only used the TMFX model as a single head for a very short period. The single head was then commonly known as the TMEX-C machine which was basically a one head version of the TMFX.<br />
<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
| TMEX-C1201 || 1|| 12 || 280 x 500mm || 1200 || || 1996-1999 || White<br />
|-<br />
| TMEX-C1501 || 1|| 15 || 280 x 500mm || 1200 || || 1999-2007 || White<br />
|-<br />
| TMFX-C901 || 1 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFXC-1202 || 2 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1204 || 4 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1206 || 6 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1502 || 2 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1504 || 4 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1506 || 6 || 15 || || || || 2002-2010 || White<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-HC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = TME-HC912<br />
| embSeriesYears = 1990 - 1994<br />
| embSeriesHeads = 4, 6, 12, 15, 20<br />
| embSeriesNeedles = 6, 9 <br />
| embSeriesInput = Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-HC Series===<br />
In 1990 Tajima released the TME-HC series embroidery machine. The TME-HC did not come with a floppy disk drive and only came with ports for external readers such as an external paper tape reader or Floppy Drive. The machine came in options of 4,6, 12, 15 or 20 heads. The machine only had manually removable table tops (nothing automatic). The machine was only available as 6 or 9 needles.<br />
====1990-1992====<br />
In 1990 Tajima released their first TME-HC model. The original HC models had mechanical thread break detectors that ran off a mechanical cam system. When the machine made a color change, the lob of the cam would physically close the thread break detection circuit. The HC models from this era had pretension knobs apart from the heads located in front of the mechanical thread break detection system.<br />
====1993-1994====<br />
The TME-HC machines released after 1992 came with standard [[DU-10]] power boxes for the X and Y card. Each head was equipped with individual thread break boards and sensors, replacing the original HC design. The machines from this era looked much more like their predecessor, the TME-DC. The last TME-HC machine was produced in 1994.<br />
==== TME-HC Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TME-HC606 (G1) || 6 || 6 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC612 (G1) || 12 || 6 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC904 (G1) || 4 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC906 (G1) || 6 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC912 (G1) || 12 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC906 (G2) || 6 || 9 || emb Space || SPM || POWEW || 1993-1994 || Green<br />
|-<br />
| TME-HC912 (G2) || 12 || 9 || emb Space || SPM || POWEW || 1993-1994 || Green<br />
|-<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-DC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = A Tajima TME-DC912 Green model<br />
| embSeriesYears = 1994 - 20xx<br />
| embSeriesHeads = 6 - 20<br />
| embSeriesNeedles = 9 - 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-DC Series===<br />
In 1994 Tajima released the TME-DC series embroidery machine. [[File:Dc912.jpg |thumb|left|alt=Tajima TME-DC912 model circa 1994|Tajima TME-DC912 model circa 1994]]<br />
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before. Unlile the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers. Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads. The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.<br />
====1994-20xx====<br />
<br />
==See also==<br />
*[[FloppyToUSB]]<br />
*[[Tajima TMFX Electronics]]<br />
<br />
==References==<br />
{{Reflist|2}}<br />
<br />
==External links==<br />
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php: Tajima TMFX User Manual]<br />
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Tajima&diff=1089Tajima2013-08-07T22:58:03Z<p>72.13.81.228: /* TME-HC Specifications */</p>
<hr />
<div>{{Infobox machineInfo<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyDesc = Tajima Embroidery Machine<br />
| embHeadQuarters = Japan<br />
| embWebSite = http://www.Tajima.com<br />
| yearsActive = 1944 - Present<br />
| yearsMachines = 1964 - Present<br />
}}<br />
<br />
'''Tajima''' is a distributor of single and multi-head [[embroidery machines]]. The Tajima embroidery machine company is based out of Japan. Tajima is one of the most popular embroidery machine companies in the world. The early model Tajimas produced till around 1996 were more green color based. Around the mid 1996's Tajima changed from the light green color scheme with dark green logo to, their more common white color scheme with a green, pink and blue logo. Tokai Industrial Sewing Machines Co. LTD was the original manufactures of the machines distributed by Tajima.<br />
<br />
Tajima has produced embroidery machines with 1, 2, 4, 6, 8, 10, 12, 15, 20 and 24 heads. In The United States most all Tajima models are 1, 2, 4, 6 and 12 head. Most the 8 head machines and machines larger than 12 heads were more common in other countries. Very few 8 heads can be found in the United States but are much more common in Asian countries. Tajima has produced machines with 1, 3, 4, 6, 9, 12 and 15 needles. Machines with 6 needles are common in the very early 1990s. 9 needle machines became popular during the mid 1990s. Late 1990s to around 2010 most machines were 12 needles. 15 needle machines are standard now. Tajima machines with less than 6 needles are generally specialty machines.<br />
<br />
==History, origin and sales==<br />
The Tajima embroidery machine company rose to popularity in the United States between the very late 1980s and the very early 1990s. Along with the Barudan embroidery machine, Tajima was one of the top 2 embroidery machines nationwide in the USA. Both Barudan and Tajima remain to be the two most popular models in the United States for production embroidery usage.<br />
<br />
Tajima continues to lead sales in most of the west and south of the USA whereas Barudan leads sales in the north and east. Most of the rest of the United States is evenly divided among the two major embroidery machines (Tajima and Barudan). Tajimas are more commonly seen around Mexico and most of Central America whereas Barudan tends to lead sales in countries such as Colombia, Peru, Venezuela. Countries such as Argentina, Canada, Brazil, and Chile are divided among both Tajima and Barudan for popularity rights.<br />
<br />
Tajimas machines original ran off paper punch cards from the 1970s till the 1980s when they were replaced by paper tape. Paper tape was soon replaced by floppy drives. Most all Tajima machines today are now run off USB drives.<br />
<br />
==Other Equipment==<br />
In addition to Tajima producing single and multi-head embroidery machines, Tajima also produces chenille machines, and machines with sequin devices.<br />
<br />
==Software Extensions==<br />
Tajima DST (.dst) is the most common software extension for Tajima software and machines. However, Tajima uses several other [[embroidery software formats]]. Tajima DST is the most common embroidery format found.<br />
<br />
==Embroidery Machines==<br />
{{Infobox machineType<br />
| embSeries = TMFX/TMEX-C<br />
| embName = Tajima<br />
| embCompanyImage = Tmfx-c902.jpg <br />
| embCompanyImageDesc = An early model TMFX-C902 machine<br />
| embSeriesYears = 1990 - 20xx<br />
| embSeriesHeads = 1, 2, 4, 6, 8<br />
| embSeriesNeedles = 9, 12, 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TMEX-C / TMFX Series===<br />
[[File:Tmfx_usb2.jpg |thumb|left|alt=Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed|Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed]]<br />
The Tajima TMFX model has been one of the longest produced models of the Tajima embroidery machine series. <br />
<br />
{{for|the Tajima TMFX machine electronics info|Tajima TMFX Electronics}}<br />
<br />
''For the Tajima TMFX user manual see [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php Tajima TMFX User Manual]''<br />
<br />
Tajima claims the TMEX-C machine was The World First with Wide Cap Frame. ''"The WORLD FIRST! The wide cap frame drastically expands your embroidery repertoire to include everything from designs on the front of the cap to designs that extends to the wide panels. It opens up unlimited possibilities for creative cap embroidery and for significant imporments in added value."''<br />
<br />
A very small percentage (less than 5%) of the TMFX and TMEX machines used narrow height floppy disk drives. The narrow height floppy disk drives have long been discontinued. Only regular sized floppy drives and floppy to USB drives can be used to replace the old 3 1/2 floppy drives on these machines. This means a very few amount of the TMFX control panels must be slight enlarged at the floppy drive port when accommodating these newer style drives.<br />
<br />
The Tajima TMFX and TMEX share very similar, almost identical, control panels.<br />
<br />
====1990-20xx====<br />
In 1990 Tajima released the TMFX series embroidery machine. The TMFX models came in both single head and multi-head versions. The first TMFX model was the TMFX-C901 model which was a nine needle single head embroidery machine. The machine had automatic color change and automatic trimmers. The single head and dual head models both had removable bases. <br />
<br />
====1995====<br />
In 1995 Tajima released the TMEX-C embroidery machine. The TMEX-C was designed to replace the single head TMFX model.<br />
<br />
Tajima only used the TMFX model as a single head for a very short period. The single head was then commonly known as the TMEX-C machine which was basically a one head version of the TMFX.<br />
<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
| TMEX-C1201 || 1|| 12 || 280 x 500mm || 1200 || || 1996-1999 || White<br />
|-<br />
| TMEX-C1501 || 1|| 15 || 280 x 500mm || 1200 || || 1999-2007 || White<br />
|-<br />
| TMFX-C901 || 1 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFXC-1202 || 2 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1204 || 4 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1206 || 6 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1502 || 2 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1504 || 4 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1506 || 6 || 15 || || || || 2002-2010 || White<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-HC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = TME-HC912<br />
| embSeriesYears = 1990 - 1994<br />
| embSeriesHeads = 4, 6, 12, 15, 20<br />
| embSeriesNeedles = 6, 9 <br />
| embSeriesInput = Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-HC Series===<br />
In 1990 Tajima released the TME-HC series embroidery machine. The TME-HC did not come with a floppy disk drive and only came with ports for external readers such as an external paper tape reader or Floppy Drive. The machine came in options of 4,6, 12, 15 or 20 heads. The machine only had manually removable table tops (nothing automatic). The machine was only available as 6 or 9 needles.<br />
====1990-1992====<br />
In 1990 Tajima released their first TME-HC model. The original HC models had mechanical thread break detectors that ran off a mechanical cam system. When the machine made a color change, the lob of the cam would physically close the thread break detection circuit. The HC models from this era had pretension knobs apart from the heads located in front of the mechanical thread break detection system.<br />
====1993-1994====<br />
The TME-HC machines released after 1992 came with standard [[DU-10]] power boxes for the X and Y card. Each head was equipped with individual thread break boards and sensors, replacing the original HC design. The machines from this era looked much more like their predecessor, the TME-DC. The last TME-HC machine was produced in 1994.<br />
==== TME-HC Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TME-HC606 (G1) || 6 || 6 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC612 (G1) || 12 || 6 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC904 (G1) || 4 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC906 (G1) || 6 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
| TME-HC912 (G1) || 12 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-DC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = A Tajima TME-DC912 Green model<br />
| embSeriesYears = 1994 - 20xx<br />
| embSeriesHeads = 6 - 20<br />
| embSeriesNeedles = 9 - 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-DC Series===<br />
In 1994 Tajima released the TME-DC series embroidery machine. [[File:Dc912.jpg |thumb|left|alt=Tajima TME-DC912 model circa 1994|Tajima TME-DC912 model circa 1994]]<br />
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before. Unlile the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers. Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads. The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.<br />
====1994-20xx====<br />
<br />
==See also==<br />
*[[FloppyToUSB]]<br />
*[[Tajima TMFX Electronics]]<br />
<br />
==References==<br />
{{Reflist|2}}<br />
<br />
==External links==<br />
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php: Tajima TMFX User Manual]<br />
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Tajima&diff=1088Tajima2013-08-07T22:55:47Z<p>72.13.81.228: /* TMEX-C / TMFX Specifications */</p>
<hr />
<div>{{Infobox machineInfo<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyDesc = Tajima Embroidery Machine<br />
| embHeadQuarters = Japan<br />
| embWebSite = http://www.Tajima.com<br />
| yearsActive = 1944 - Present<br />
| yearsMachines = 1964 - Present<br />
}}<br />
<br />
'''Tajima''' is a distributor of single and multi-head [[embroidery machines]]. The Tajima embroidery machine company is based out of Japan. Tajima is one of the most popular embroidery machine companies in the world. The early model Tajimas produced till around 1996 were more green color based. Around the mid 1996's Tajima changed from the light green color scheme with dark green logo to, their more common white color scheme with a green, pink and blue logo. Tokai Industrial Sewing Machines Co. LTD was the original manufactures of the machines distributed by Tajima.<br />
<br />
Tajima has produced embroidery machines with 1, 2, 4, 6, 8, 10, 12, 15, 20 and 24 heads. In The United States most all Tajima models are 1, 2, 4, 6 and 12 head. Most the 8 head machines and machines larger than 12 heads were more common in other countries. Very few 8 heads can be found in the United States but are much more common in Asian countries. Tajima has produced machines with 1, 3, 4, 6, 9, 12 and 15 needles. Machines with 6 needles are common in the very early 1990s. 9 needle machines became popular during the mid 1990s. Late 1990s to around 2010 most machines were 12 needles. 15 needle machines are standard now. Tajima machines with less than 6 needles are generally specialty machines.<br />
<br />
==History, origin and sales==<br />
The Tajima embroidery machine company rose to popularity in the United States between the very late 1980s and the very early 1990s. Along with the Barudan embroidery machine, Tajima was one of the top 2 embroidery machines nationwide in the USA. Both Barudan and Tajima remain to be the two most popular models in the United States for production embroidery usage.<br />
<br />
Tajima continues to lead sales in most of the west and south of the USA whereas Barudan leads sales in the north and east. Most of the rest of the United States is evenly divided among the two major embroidery machines (Tajima and Barudan). Tajimas are more commonly seen around Mexico and most of Central America whereas Barudan tends to lead sales in countries such as Colombia, Peru, Venezuela. Countries such as Argentina, Canada, Brazil, and Chile are divided among both Tajima and Barudan for popularity rights.<br />
<br />
Tajimas machines original ran off paper punch cards from the 1970s till the 1980s when they were replaced by paper tape. Paper tape was soon replaced by floppy drives. Most all Tajima machines today are now run off USB drives.<br />
<br />
==Other Equipment==<br />
In addition to Tajima producing single and multi-head embroidery machines, Tajima also produces chenille machines, and machines with sequin devices.<br />
<br />
==Software Extensions==<br />
Tajima DST (.dst) is the most common software extension for Tajima software and machines. However, Tajima uses several other [[embroidery software formats]]. Tajima DST is the most common embroidery format found.<br />
<br />
==Embroidery Machines==<br />
{{Infobox machineType<br />
| embSeries = TMFX/TMEX-C<br />
| embName = Tajima<br />
| embCompanyImage = Tmfx-c902.jpg <br />
| embCompanyImageDesc = An early model TMFX-C902 machine<br />
| embSeriesYears = 1990 - 20xx<br />
| embSeriesHeads = 1, 2, 4, 6, 8<br />
| embSeriesNeedles = 9, 12, 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TMEX-C / TMFX Series===<br />
[[File:Tmfx_usb2.jpg |thumb|left|alt=Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed|Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed]]<br />
The Tajima TMFX model has been one of the longest produced models of the Tajima embroidery machine series. <br />
<br />
{{for|the Tajima TMFX machine electronics info|Tajima TMFX Electronics}}<br />
<br />
''For the Tajima TMFX user manual see [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php Tajima TMFX User Manual]''<br />
<br />
Tajima claims the TMEX-C machine was The World First with Wide Cap Frame. ''"The WORLD FIRST! The wide cap frame drastically expands your embroidery repertoire to include everything from designs on the front of the cap to designs that extends to the wide panels. It opens up unlimited possibilities for creative cap embroidery and for significant imporments in added value."''<br />
<br />
A very small percentage (less than 5%) of the TMFX and TMEX machines used narrow height floppy disk drives. The narrow height floppy disk drives have long been discontinued. Only regular sized floppy drives and floppy to USB drives can be used to replace the old 3 1/2 floppy drives on these machines. This means a very few amount of the TMFX control panels must be slight enlarged at the floppy drive port when accommodating these newer style drives.<br />
<br />
The Tajima TMFX and TMEX share very similar, almost identical, control panels.<br />
<br />
====1990-20xx====<br />
In 1990 Tajima released the TMFX series embroidery machine. The TMFX models came in both single head and multi-head versions. The first TMFX model was the TMFX-C901 model which was a nine needle single head embroidery machine. The machine had automatic color change and automatic trimmers. The single head and dual head models both had removable bases. <br />
<br />
====1995====<br />
In 1995 Tajima released the TMEX-C embroidery machine. The TMEX-C was designed to replace the single head TMFX model.<br />
<br />
Tajima only used the TMFX model as a single head for a very short period. The single head was then commonly known as the TMEX-C machine which was basically a one head version of the TMFX.<br />
<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
| TMEX-C1201 || 1|| 12 || 280 x 500mm || 1200 || || 1996-1999 || White<br />
|-<br />
| TMEX-C1501 || 1|| 15 || 280 x 500mm || 1200 || || 1999-2007 || White<br />
|-<br />
| TMFX-C901 || 1 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFXC-1202 || 2 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1204 || 4 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1206 || 6 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1502 || 2 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1504 || 4 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1506 || 6 || 15 || || || || 2002-2010 || White<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-HC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = TME-HC912<br />
| embSeriesYears = 1990 - 1994<br />
| embSeriesHeads = 4, 6, 12, 15, 20<br />
| embSeriesNeedles = 6, 9 <br />
| embSeriesInput = Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-HC Series===<br />
In 1990 Tajima released the TME-HC series embroidery machine. The TME-HC did not come with a floppy disk drive and only came with ports for external readers such as an external paper tape reader or Floppy Drive. The machine came in options of 4,6, 12, 15 or 20 heads. The machine only had manually removable table tops (nothing automatic). The machine was only available as 6 or 9 needles.<br />
====1990-1992====<br />
In 1990 Tajima released their first TME-HC model. The original HC models had mechanical thread break detectors that ran off a mechanical cam system. When the machine made a color change, the lob of the cam would physically close the thread break detection circuit. The HC models from this era had pretension knobs apart from the heads located in front of the mechanical thread break detection system.<br />
====1993-1994====<br />
The TME-HC machines released after 1992 came with standard [[DU-10]] power boxes for the X and Y card. Each head was equipped with individual thread break boards and sensors, replacing the original HC design. The machines from this era looked much more like their predecessor, the TME-DC. The last TME-HC machine was produced in 1994.<br />
==== TME-HC Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TME-HC904 (G1) || 4 || 9 || emb Space || SPM || POWEW || 1990-1992 || Green<br />
|-<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-DC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = A Tajima TME-DC912 Green model<br />
| embSeriesYears = 1994 - 20xx<br />
| embSeriesHeads = 6 - 20<br />
| embSeriesNeedles = 9 - 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-DC Series===<br />
In 1994 Tajima released the TME-DC series embroidery machine. [[File:Dc912.jpg |thumb|left|alt=Tajima TME-DC912 model circa 1994|Tajima TME-DC912 model circa 1994]]<br />
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before. Unlile the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers. Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads. The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.<br />
====1994-20xx====<br />
<br />
==See also==<br />
*[[FloppyToUSB]]<br />
*[[Tajima TMFX Electronics]]<br />
<br />
==References==<br />
{{Reflist|2}}<br />
<br />
==External links==<br />
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php: Tajima TMFX User Manual]<br />
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Tajima&diff=1087Tajima2013-08-07T22:53:52Z<p>72.13.81.228: </p>
<hr />
<div>{{Infobox machineInfo<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyDesc = Tajima Embroidery Machine<br />
| embHeadQuarters = Japan<br />
| embWebSite = http://www.Tajima.com<br />
| yearsActive = 1944 - Present<br />
| yearsMachines = 1964 - Present<br />
}}<br />
<br />
'''Tajima''' is a distributor of single and multi-head [[embroidery machines]]. The Tajima embroidery machine company is based out of Japan. Tajima is one of the most popular embroidery machine companies in the world. The early model Tajimas produced till around 1996 were more green color based. Around the mid 1996's Tajima changed from the light green color scheme with dark green logo to, their more common white color scheme with a green, pink and blue logo. Tokai Industrial Sewing Machines Co. LTD was the original manufactures of the machines distributed by Tajima.<br />
<br />
Tajima has produced embroidery machines with 1, 2, 4, 6, 8, 10, 12, 15, 20 and 24 heads. In The United States most all Tajima models are 1, 2, 4, 6 and 12 head. Most the 8 head machines and machines larger than 12 heads were more common in other countries. Very few 8 heads can be found in the United States but are much more common in Asian countries. Tajima has produced machines with 1, 3, 4, 6, 9, 12 and 15 needles. Machines with 6 needles are common in the very early 1990s. 9 needle machines became popular during the mid 1990s. Late 1990s to around 2010 most machines were 12 needles. 15 needle machines are standard now. Tajima machines with less than 6 needles are generally specialty machines.<br />
<br />
==History, origin and sales==<br />
The Tajima embroidery machine company rose to popularity in the United States between the very late 1980s and the very early 1990s. Along with the Barudan embroidery machine, Tajima was one of the top 2 embroidery machines nationwide in the USA. Both Barudan and Tajima remain to be the two most popular models in the United States for production embroidery usage.<br />
<br />
Tajima continues to lead sales in most of the west and south of the USA whereas Barudan leads sales in the north and east. Most of the rest of the United States is evenly divided among the two major embroidery machines (Tajima and Barudan). Tajimas are more commonly seen around Mexico and most of Central America whereas Barudan tends to lead sales in countries such as Colombia, Peru, Venezuela. Countries such as Argentina, Canada, Brazil, and Chile are divided among both Tajima and Barudan for popularity rights.<br />
<br />
Tajimas machines original ran off paper punch cards from the 1970s till the 1980s when they were replaced by paper tape. Paper tape was soon replaced by floppy drives. Most all Tajima machines today are now run off USB drives.<br />
<br />
==Other Equipment==<br />
In addition to Tajima producing single and multi-head embroidery machines, Tajima also produces chenille machines, and machines with sequin devices.<br />
<br />
==Software Extensions==<br />
Tajima DST (.dst) is the most common software extension for Tajima software and machines. However, Tajima uses several other [[embroidery software formats]]. Tajima DST is the most common embroidery format found.<br />
<br />
==Embroidery Machines==<br />
{{Infobox machineType<br />
| embSeries = TMFX/TMEX-C<br />
| embName = Tajima<br />
| embCompanyImage = Tmfx-c902.jpg <br />
| embCompanyImageDesc = An early model TMFX-C902 machine<br />
| embSeriesYears = 1990 - 20xx<br />
| embSeriesHeads = 1, 2, 4, 6, 8<br />
| embSeriesNeedles = 9, 12, 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TMEX-C / TMFX Series===<br />
[[File:Tmfx_usb2.jpg |thumb|left|alt=Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed|Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed]]<br />
The Tajima TMFX model has been one of the longest produced models of the Tajima embroidery machine series. <br />
<br />
{{for|the Tajima TMFX machine electronics info|Tajima TMFX Electronics}}<br />
<br />
''For the Tajima TMFX user manual see [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php Tajima TMFX User Manual]''<br />
<br />
Tajima claims the TMEX-C machine was The World First with Wide Cap Frame. ''"The WORLD FIRST! The wide cap frame drastically expands your embroidery repertoire to include everything from designs on the front of the cap to designs that extends to the wide panels. It opens up unlimited possibilities for creative cap embroidery and for significant imporments in added value."''<br />
<br />
A very small percentage (less than 5%) of the TMFX and TMEX machines used narrow height floppy disk drives. The narrow height floppy disk drives have long been discontinued. Only regular sized floppy drives and floppy to USB drives can be used to replace the old 3 1/2 floppy drives on these machines. This means a very few amount of the TMFX control panels must be slight enlarged at the floppy drive port when accommodating these newer style drives.<br />
<br />
The Tajima TMFX and TMEX share very similar, almost identical, control panels.<br />
<br />
====1990-20xx====<br />
In 1990 Tajima released the TMFX series embroidery machine. The TMFX models came in both single head and multi-head versions. The first TMFX model was the TMFX-C901 model which was a nine needle single head embroidery machine. The machine had automatic color change and automatic trimmers. The single head and dual head models both had removable bases. <br />
<br />
====1995====<br />
In 1995 Tajima released the TMEX-C embroidery machine. The TMEX-C was designed to replace the single head TMFX model.<br />
<br />
Tajima only used the TMFX model as a single head for a very short period. The single head was then commonly known as the TMEX-C machine which was basically a one head version of the TMFX.<br />
<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
| TMEX-C1201 || 1|| 12 || 280 x 500mm || 1200 || || 1996-1999 || White<br />
|-<br />
| TMEX-C1501 || 1|| 15 || 280 x 500mm || 1200 || || 1999-2007 || White<br />
|-<br />
| TMFX-C901 || 1 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFXC-1202 || 2 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1204 || 4 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1206 || 6 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1502 || 2 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1504 || 4 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1506 || 6 || 15 || || || || 2002-2010 || White<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-HC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = TME-HC912<br />
| embSeriesYears = 1990 - 1994<br />
| embSeriesHeads = 4, 6, 12, 15, 20<br />
| embSeriesNeedles = 6, 9 <br />
| embSeriesInput = Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-HC Series===<br />
In 1990 Tajima released the TME-HC series embroidery machine. The TME-HC did not come with a floppy disk drive and only came with ports for external readers such as an external paper tape reader or Floppy Drive. The machine came in options of 4,6, 12, 15 or 20 heads. The machine only had manually removable table tops (nothing automatic). The machine was only available as 6 or 9 needles.<br />
====1990-1992====<br />
In 1990 Tajima released their first TME-HC model. The original HC models had mechanical thread break detectors that ran off a mechanical cam system. When the machine made a color change, the lob of the cam would physically close the thread break detection circuit. The HC models from this era had pretension knobs apart from the heads located in front of the mechanical thread break detection system.<br />
====1993-1994====<br />
The TME-HC machines released after 1992 came with standard [[DU-10]] power boxes for the X and Y card. Each head was equipped with individual thread break boards and sensors, replacing the original HC design. The machines from this era looked much more like their predecessor, the TME-DC. The last TME-HC machine was produced in 1994.<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-DC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = A Tajima TME-DC912 Green model<br />
| embSeriesYears = 1994 - 20xx<br />
| embSeriesHeads = 6 - 20<br />
| embSeriesNeedles = 9 - 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-DC Series===<br />
In 1994 Tajima released the TME-DC series embroidery machine. [[File:Dc912.jpg |thumb|left|alt=Tajima TME-DC912 model circa 1994|Tajima TME-DC912 model circa 1994]]<br />
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before. Unlile the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers. Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads. The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.<br />
====1994-20xx====<br />
<br />
==See also==<br />
*[[FloppyToUSB]]<br />
*[[Tajima TMFX Electronics]]<br />
<br />
==References==<br />
{{Reflist|2}}<br />
<br />
==External links==<br />
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php: Tajima TMFX User Manual]<br />
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Tajima&diff=1086Tajima2013-08-07T22:48:57Z<p>72.13.81.228: /* TMEX-C / TMFX Specifications */</p>
<hr />
<div>{{Infobox machineInfo<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyDesc = Tajima Embroidery Machine<br />
| embHeadQuarters = Japan<br />
| embWebSite = http://www.Tajima.com<br />
| yearsActive = 1944 - Present<br />
| yearsMachines = 1964 - Present<br />
}}<br />
<br />
'''Tajima''' is a distributor of single and multi-head [[embroidery machines]]. The Tajima embroidery machine company is based out of Japan. Tajima is one of the most popular embroidery machine companies in the world. The early model Tajimas produced till around 1996 were more green color based. Around the mid 1996's Tajima changed from the light green color scheme with dark green logo to, their more common white color scheme with a green, pink and blue logo. Tokai Industrial Sewing Machines Co. LTD was the original manufactures of the machines distributed by Tajima.<br />
<br />
Tajima has produced embroidery machines with 1, 2, 4, 6, 8, 10, 12, 15, 20 and 24 heads. In The United States most all Tajima models are 1, 2, 4, 6 and 12 head. Most the 8 head machines and machines larger than 12 heads were more common in other countries. Very few 8 heads can be found in the United States but are much more common in Asian countries. Tajima has produced machines with 1, 3, 4, 6, 9, 12 and 15 needles. Machines with 6 needles are common in the very early 1990s. 9 needle machines became popular during the mid 1990s. Late 1990s to around 2010 most machines were 12 needles. 15 needle machines are standard now. Tajima machines with less than 6 needles are generally specialty machines.<br />
<br />
==History, origin and sales==<br />
The Tajima embroidery machine company rose to popularity in the United States between the very late 1980s and the very early 1990s. Along with the Barudan embroidery machine, Tajima was one of the top 2 embroidery machines nationwide in the USA. Both Barudan and Tajima remain to be the two most popular models in the United States for production embroidery usage.<br />
<br />
Tajima continues to lead sales in most of the west and south of the USA whereas Barudan leads sales in the north and east. Most of the rest of the United States is evenly divided among the two major embroidery machines (Tajima and Barudan). Tajimas are more commonly seen around Mexico and most of Central America whereas Barudan tends to lead sales in countries such as Colombia, Peru, Venezuela. Countries such as Argentina, Canada, Brazil, and Chile are divided among both Tajima and Barudan for popularity rights.<br />
<br />
Tajimas machines original ran off paper punch cards from the 1970s till the 1980s when they were replaced by paper tape. Paper tape was soon replaced by floppy drives. Most all Tajima machines today are now run off USB drives.<br />
<br />
==Other Equipment==<br />
In addition to Tajima producing single and multi-head embroidery machines, Tajima also produces chenille machines, and machines with sequin devices.<br />
<br />
==Software Extensions==<br />
Tajima DST (.dst) is the most common software extension for Tajima software and machines. However, Tajima uses several other [[embroidery software formats]]. Tajima DST is the most common embroidery format found.<br />
<br />
==Embroidery Machines==<br />
{{Infobox machineType<br />
| embSeries = TMFX/TMEX-C<br />
| embName = Tajima<br />
| embCompanyImage = Tmfx-c902.jpg <br />
| embCompanyImageDesc = An early model TMFX-C902 machine<br />
| embSeriesYears = 1990 - 20xx<br />
| embSeriesHeads = 1, 2, 4, 6, 8<br />
| embSeriesNeedles = 9, 12, 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TMEX-C / TMFX Series===<br />
[[File:Tmfx_usb2.jpg |thumb|left|alt=Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed|Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed]]<br />
The Tajima TMFX model has been one of the longest produced models of the Tajima embroidery machine series. <br />
<br />
{{for|the Tajima TMFX machine electronics info|Tajima TMFX Electronics}}<br />
<br />
''For the Tajima TMFX user manual see [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php Tajima TMFX User Manual]''<br />
<br />
Tajima claims the TMEX-C machine was The World First with Wide Cap Frame. ''"The WORLD FIRST! The wide cap frame drastically expands your embroidery repertoire to include everything from designs on the front of the cap to designs that extends to the wide panels. It opens up unlimited possibilities for creative cap embroidery and for significant imporments in added value."''<br />
<br />
A very small percentage (less than 5%) of the TMFX and TMEX machines used narrow height floppy disk drives. The narrow height floppy disk drives have long been discontinued. Only regular sized floppy drives and floppy to USB drives can be used to replace the old 3 1/2 floppy drives on these machines. This means a very few amount of the TMFX control panels must be slight enlarged at the floppy drive port when accommodating these newer style drives.<br />
<br />
The Tajima TMFX and TMEX share very similar, almost identical, control panels.<br />
<br />
====1990-20xx====<br />
In 1990 Tajima released the TMFX series embroidery machine. The TMFX models came in both single head and multi-head versions. The first TMFX model was the TMFX-C901 model which was a nine needle single head embroidery machine. The machine had automatic color change and automatic trimmers. The single head and dual head models both had removable bases. <br />
<br />
====1995====<br />
In 1995 Tajima released the TMEX-C embroidery machine. The TMEX-C was designed to replace the single head TMFX model.<br />
<br />
Tajima only used the TMFX model as a single head for a very short period. The single head was then commonly known as the TMEX-C machine which was basically a one head version of the TMFX.<br />
<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
| TMEX-C1201 || 1|| 12 || 280 x 500mm || 1200 || || 1996-1999 || White<br />
|-<br />
| TMEX-C1501 || 1|| 15 || 280 x 500mm || 1200 || || 1999-2007 || White<br />
|-<br />
| TMFX-C901 || 1 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFXC-1202 || 2 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1204 || 4 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1206 || 6 || 12 || || || || 1996-2001 || White<br />
|-<br />
| TMFXC-1502 || 2 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1504 || 4 || 15 || || || || 2002-2010 || White<br />
|-<br />
| TMFXC-1506 || 6 || 15 || || || || 2002-2010 || White<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-HC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = TME-HC912<br />
| embSeriesYears = 1990 - 1994<br />
| embSeriesHeads = 4, 6, 12, 15, 20<br />
| embSeriesNeedles = 6, 9 <br />
| embSeriesInput = Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-HC Series===<br />
In 1990 Tajima released the TME-HC series embroidery machine. The TME-HC did not come with a floppy disk drive and only came with ports for external readers such as an external paper tape reader or Floppy Drive. The machine came in options of 4,6, 12, 15 or 20 heads. The machine only had manually removable table tops (nothing automatic). The machine was only available as 6 or 9 needles.<br />
====1990-1992====<br />
In 1990 Tajima released their first TME-HC model. The original HC models had mechanical thread break detectors that ran off a mechanical cam system. When the machine made a color change, the lob of the cam would physically close the thread break detection circuit. The HC models from this era had pretension knobs apart from the heads located in front of the mechanical thread break detection system.<br />
====1993-1994====<br />
The TME-HC machines released after 1992 came with standard [[DU-10]] power boxes for the X and Y card. Each head was equipped with individual thread break boards and sensors, replacing the original HC design. The machines from this era looked much more like their predecessor, the TME-DC. The last TME-HC machine was produced in 1994.<br />
<br />
{{Infobox machineType<br />
| embSeries = TME-DC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = A Tajima TME-DC912 Green model<br />
| embSeriesYears = 1994 - 20xx<br />
| embSeriesHeads = 6 - 20<br />
| embSeriesNeedles = 9 - 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-DC Series===<br />
In 1994 Tajima released the TME-DC series embroidery machine. [[File:Dc912.jpg |thumb|left|alt=Tajima TME-DC912 model circa 1994|Tajima TME-DC912 model circa 1994]]<br />
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before. Unlile the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers. Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads. The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.<br />
====1994-20xx====<br />
<br />
==See also==<br />
*[[FloppyToUSB]]<br />
*[[Tajima TMFX Electronics]]<br />
<br />
==References==<br />
{{Reflist|2}}<br />
<br />
==External links==<br />
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php: Tajima TMFX User Manual]<br />
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_software_formats&diff=1085Embroidery software formats2013-08-07T22:39:46Z<p>72.13.81.228: </p>
<hr />
<div>;Tajima DST: Extension - '''.dst''' - The correct naming convention for a [[Tajima]] DST is gXXX.dst where the letter '''g''' is lowercase and the 3 '''X''' are numerical values from 001 - 099 not to exceed or equal 100. If one does not abide to these naming conventions it is possible that the embroidery machine will not read, view or recognize the embroidery design.</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_software_formats&diff=1084Embroidery software formats2013-08-07T22:39:02Z<p>72.13.81.228: </p>
<hr />
<div>;Tajima DST: Extension - '''.dst''' - The correct naming convention for a Tajima DST is gXXX.dst where the letter '''g''' is lowercase and the 3 '''X''' are numerical values from 001 - 099 not to exceed or equal 100. If one does not abide to these naming conventions it is possible that the embroidery machine will not read the design.</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_software_formats&diff=1083Embroidery software formats2013-08-07T22:38:16Z<p>72.13.81.228: </p>
<hr />
<div>;Tajima DST: Extension - '''.dst''' - The correct naming convention for a Tajima DST is gXXX.dst where the letter '''g''' is lowercase and the 3 '''X''' are numerical values 001 - 099. If one does not abide to these naming conventions it is possible that the embroidery machine will not read the design.</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Embroidery_software_formats&diff=1082Embroidery software formats2013-08-07T22:32:41Z<p>72.13.81.228: Created page with "{| class="wikitable" |- ! Header text !! Header text |- | Example || Example |- | Example || Example |- | Example || Example |}"</p>
<hr />
<div>{| class="wikitable"<br />
|-<br />
! Header text !! Header text<br />
|-<br />
| Example || Example<br />
|-<br />
| Example || Example<br />
|-<br />
| Example || Example<br />
|}</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Tajima&diff=1081Tajima2013-08-07T22:31:37Z<p>72.13.81.228: /* Software Extensions */</p>
<hr />
<div>{{Infobox machineInfo<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyDesc = Tajima Embroidery Machine<br />
| embHeadQuarters = Japan<br />
| embWebSite = http://www.Tajima.com<br />
| yearsActive = 1944 - Present<br />
| yearsMachines = 1964 - Present<br />
}}<br />
<br />
'''Tajima''' is a distributor of single and multi-head [[embroidery machines]]. The Tajima embroidery machine company is based out of Japan. Tajima is one of the most popular embroidery machine companies in the world. The early model Tajimas produced till around 1996 were more green color based. Around the mid 1996's Tajima changed from the light green color scheme with dark green logo to, their more common white color scheme with a green, pink and blue logo. Tokai Industrial Sewing Machines Co. LTD was the original manufactures of the machines distributed by Tajima.<br />
<br />
Tajima has produced embroidery machines with 1, 2, 4, 6, 8, 10, 12, 15, 20 and 24 heads. In The United States most all Tajima models are 1, 2, 4, 6 and 12 head. Most the 8 head machines and machines larger than 12 heads were more common in other countries. Very few 8 heads can be found in the United States but are much more common in Asian countries. Tajima has produced machines with 1, 3, 4, 6, 9, 12 and 15 needles. Machines with 6 needles are common in the very early 1990s. 9 needle machines became popular during the mid 1990s. Late 1990s to around 2010 most machines were 12 needles. 15 needle machines are standard now. Tajima machines with less than 6 needles are generally specialty machines.<br />
<br />
==History, origin and sales==<br />
The Tajima embroidery machine company rose to popularity in the United States between the very late 1980s and the very early 1990s. Along with the Barudan embroidery machine, Tajima was one of the top 2 embroidery machines nationwide in the USA. Both Barudan and Tajima remain to be the two most popular models in the United States for production embroidery usage.<br />
<br />
Tajima continues to lead sales in most of the west and south of the USA whereas Barudan leads sales in the north and east. Most of the rest of the United States is evenly divided among the two major embroidery machines (Tajima and Barudan). Tajimas are more commonly seen around Mexico and most of Central America whereas Barudan tends to lead sales in countries such as Colombia, Peru, Venezuela. Countries such as Argentina, Canada, Brazil, and Chile are divided among both Tajima and Barudan for popularity rights.<br />
<br />
Tajimas machines original ran off paper punch cards from the 1970s till the 1980s when they were replaced by paper tape. Paper tape was soon replaced by floppy drives. Most all Tajima machines today are now run off USB drives.<br />
<br />
==Other Equipment==<br />
In addition to Tajima producing single and multi-head embroidery machines, Tajima also produces chenille machines, and machines with sequin devices.<br />
<br />
==Software Extensions==<br />
Tajima DST (.dst) is the most common software extension for Tajima software and machines. However, Tajima uses several other [[embroidery software formats]]. Tajima DST is the most common embroidery format found.<br />
<br />
==Embroidery Machines==<br />
{{Infobox machineType<br />
| embSeries = TMFX/TMEX-C<br />
| embName = Tajima<br />
| embCompanyImage = Tmfx-c902.jpg <br />
| embCompanyImageDesc = An early model TMFX-C902 machine<br />
| embSeriesYears = 1990 - 20xx<br />
| embSeriesHeads = 1, 2, 4, 6, 8<br />
| embSeriesNeedles = 9, 12, 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TMEX-C / TMFX Series===<br />
[[File:Tmfx_usb2.jpg |thumb|left|alt=Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed|Tajima TMEX-C / TMFX Control Panel with optional [[FloppyToUSB]] installed]]<br />
The Tajima TMFX model has been one of the longest produced models of the Tajima embroidery machine series. <br />
<br />
{{for|the Tajima TMFX machine electronics info|Tajima TMFX Electronics}}<br />
<br />
''For the Tajima TMFX user manual see [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php Tajima TMFX User Manual]''<br />
<br />
Tajima claims the TMEX-C machine was The World First with Wide Cap Frame. ''"The WORLD FIRST! The wide cap frame drastically expands your embroidery repertoire to include everything from designs on the front of the cap to designs that extends to the wide panels. It opens up unlimited possibilities for creative cap embroidery and for significant imporments in added value."''<br />
<br />
A very small percentage (less than 5%) of the TMFX and TMEX machines used narrow height floppy disk drives. The narrow height floppy disk drives have long been discontinued. Only regular sized floppy drives and floppy to USB drives can be used to replace the old 3 1/2 floppy drives on these machines. This means a very few amount of the TMFX control panels must be slight enlarged at the floppy drive port when accommodating these newer style drives.<br />
<br />
The Tajima TMFX and TMEX share very similar, almost identical, control panels.<br />
<br />
====1990-20xx====<br />
In 1990 Tajima released the TMFX series embroidery machine. The TMFX models came in both single head and multi-head versions. The first TMFX model was the TMFX-C901 model which was a nine needle single head embroidery machine. The machine had automatic color change and automatic trimmers. The single head and dual head models both had removable bases. <br />
<br />
====1995====<br />
In 1995 Tajima released the TMEX-C embroidery machine. The TMEX-C was designed to replace the single head TMFX model.<br />
<br />
Tajima only used the TMFX model as a single head for a very short period. The single head was then commonly known as the TMEX-C machine which was basically a one head version of the TMFX.<br />
<br />
==== TMEX-C / TMFX Specifications ====<br />
<center><br />
{| class="wikitable sortable"<br />
|-<br />
! Model !! Heads !! Needles !! EMB Space / Head !! Max SPM !! Pwr Cons. !! Years !! Color<br />
|-<br />
| TMEX-C901 || 1 || 9 || 280 x 500mm || 1200 || 400W || 1995-1996 || Green<br />
|-<br />
| TMEX-C1201 || 1|| 12 || 280 x 500mm || 1200 || || 1996-1999 || White<br />
|-<br />
| TMEX-C1501 || 1|| 15 || 280 x 500mm || 1200 || || 1999-2007 || White<br />
|-<br />
| TMFX-C901 || 1 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1990-1992 || Green<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1990-1994 || Green<br />
|-<br />
| TMFX-C902 || 2 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C904 || 4 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFX-C906 || 6 || 9 || || || || 1995-1997 || White<br />
|-<br />
| TMFXC-1202 || 2 || 12 || || || || 1996-1999 || White<br />
|-<br />
| TMFXC-1204 || 4 || 12 || || || || 1996-1999 || White<br />
|-<br />
| TMFXC-1206 || 6 || 12 || || || || 1996-1999 || White<br />
|}<br />
</center><br />
<br />
{{Infobox machineType<br />
| embSeries = TME-HC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = TME-HC912<br />
| embSeriesYears = 1990 - 1994<br />
| embSeriesHeads = 4, 6, 12, 15, 20<br />
| embSeriesNeedles = 6, 9 <br />
| embSeriesInput = Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-HC Series===<br />
In 1990 Tajima released the TME-HC series embroidery machine. The TME-HC did not come with a floppy disk drive and only came with ports for external readers such as an external paper tape reader or Floppy Drive. The machine came in options of 4,6, 12, 15 or 20 heads. The machine only had manually removable table tops (nothing automatic). The machine was only available as 6 or 9 needles.<br />
====1990-1992====<br />
In 1990 Tajima released their first TME-HC model. The original HC models had mechanical thread break detectors that ran off a mechanical cam system. When the machine made a color change, the lob of the cam would physically close the thread break detection circuit. The HC models from this era had pretension knobs apart from the heads located in front of the mechanical thread break detection system.<br />
====1993-1994====<br />
The TME-HC machines released after 1992 came with standard [[DU-10]] power boxes for the X and Y card. Each head was equipped with individual thread break boards and sensors, replacing the original HC design. The machines from this era looked much more like their predecessor, the TME-DC. The last TME-HC machine was produced in 1994.<br />
<br />
{{Infobox machineType<br />
| embSeries = TME-DC<br />
| embName = Tajima<br />
| embCompanyImage = tajimaLogo.png<br />
| embCompanyImageDesc = A Tajima TME-DC912 Green model<br />
| embSeriesYears = 1994 - 20xx<br />
| embSeriesHeads = 6 - 20<br />
| embSeriesNeedles = 9 - 15<br />
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]<br />
}}<br />
<br />
===TME-DC Series===<br />
In 1994 Tajima released the TME-DC series embroidery machine. [[File:Dc912.jpg |thumb|left|alt=Tajima TME-DC912 model circa 1994|Tajima TME-DC912 model circa 1994]]<br />
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before. Unlile the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers. Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads. The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.<br />
====1994-20xx====<br />
<br />
==See also==<br />
*[[FloppyToUSB]]<br />
*[[Tajima TMFX Electronics]]<br />
<br />
==References==<br />
{{Reflist|2}}<br />
<br />
==External links==<br />
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Manual/tajima_tmfx_instructions.php: Tajima TMFX User Manual]<br />
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]</div>72.13.81.228http://wiki.embroiderymachine.com/index.php?title=Industrial/Commercial_Embroidery_Machine&diff=1054Industrial/Commercial Embroidery Machine2013-08-07T17:44:23Z<p>72.13.81.228: Created page with "An '''Industrial or Commercial Embroidery Machine''' is an embroidery machine designed for production, or commercial embroidery. An industrial embroidery machine generally ha..."</p>
<hr />
<div>An '''Industrial or Commercial Embroidery Machine''' is an embroidery machine designed for production, or commercial embroidery. An industrial embroidery machine generally has more than one needle where each needle is used for a different colored thread. An industrial or commercial embroidery machine is different from a home or family type machine.<br />
<br />
==Brands of Commercial Embroidery Equipment==<br />
*[[Barudan]]<br />
*[[ButterFly]]<br />
*[[Melco]]<br />
*[[Tajima]]</div>72.13.81.228