View source for Method of maintenance and use of the laser concrete screed

Use laser concrete screed to make ground level is a common way，promote the project's schedule，save time，use laser alignment theory，than traditional levelling more precise，and accuracy is more high.But after use the [http://www.concrete-laser-screed.com laser concrete screed manufactor] medical treatment not forget clean the treatment
The laser concrete screed is uesd by scraper plate to blow-off out of concrete
Then use one direction revolve's cloth screw to the left and right，cut the out of concrete.To achieve the design standard tall，the rest of clothes to corkscrew of right.Leveling beam of the bottom'slope is same as trowel .When  the process of vibrate ，these  trowel will slick.The rocker due to eccentric block，every minute 3000，drive the whole flat beam，so will have vibrate about' the concrete.
How to use laser concrete screed better and how to protect?
Iaser concrete screed is not need pull the control line when make level,not need branch template to control the floor level,be controled with computer,every  sec 10,can high speed to build,the floor level can be controlled.The generating laser can lonely do,floor's level can use generating laser ,so it can in big area paver level and evenness.

Iaser concrete screed controlled by laser receiver，when use good Iaser concrete screed，how to delay live time？
Firstly，when use Iaser concrete screed after，you should use lift arm button lift up the nose，then pull the job location，tell the worker not push the part medical treatment when shake.
Secondly，after use Iaser concrete screed ，we should clean the treatment，but not leer mesh machine part，otherwise water  will enter treatment 's indoor.
Thirdly，when use aser concrete screed，we had better use battery empty to charge，have better one to filled with the power，when work after，should  unpin attaching plug.