From Embroidery Machine WIKI
Jump to navigation
Jump to search
|
|
| Line 1: |
Line 1: |
|
| |
|
| ===DU-10===
| |
| [[File:DU-10.jpg|thumb|right|alt=DU-10 Dual Unit X and Y Box|DU-10 Dual Unit X and Y Box]]
| |
| DU-10
| |
| [[File:Tajima_Power_Board.jpg|thumb|right|alt=X-Power TMFD Card|X-Power TMFD Card]]
| |
|
| |
| ===S-Card===
| |
| Power and control of the main shaft motor. This is the largest motor on the machine. This is the only card that has an optional plug in the back, which are labeled 100V and 200V. If you have 110V power then either plug works but it is not recommended to mismatch; although the 200V only slightly leeches off of the main card's ability to provide power to the rest of the system, if anything happens to the S-card then the main card will also be damaged. If you have 200V or more from your wall power, then you have no choice but to use the 200V plug; using the 100V plug with 200V wall input may damage the S-card.
| |
|
| |
| ===Color change card===
| |
| Power to the color change motor. Also reads the color change potentiometer and some solenoids.
| |
|
| |
| ===Head card===
| |
| One card per head. Detects thread break signals from the head assembly, and powers some solenoids. If one is bad, it can interfere with signals of all, including the color change card. When configuring the control panel, it also asks to pick a head card type 1 or type 2, and if the choice is wrong then all thread break signals will be wrong and erratic.
| |
|
| |
| ===Control Panel===
| |
| [[File:TMFD_usb2.jpg |thumb|right|alt=Tajima TMFD Control Panel with optional [[FloppyToUSB]] installed|Tajima TMFD Control Panel with optional [[FloppyToUSB]] installed]]
| |
| The TMFD Control Panel houses the Tajima TMFD's main computer boards which include the control panel, LCD screen and Floppy Drive or [[FloppyToUSB]] unit. The Control Panel can be opened by hand from the back with the 2 flat head hand screws. It is preferred that the control panel when undergoing repairs on any of the Control Panel component.
| |
Latest revision as of 13:37, 7 September 2013
