Difference between revisions of "270 Cap System"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[File:Large_cap_system.jpg|right|thumb|alt=270 degree cap system|270 degree cap system with cap frame and cap driver]] | [[File:Large_cap_system.jpg|right|thumb|alt=270 degree cap system|270 degree cap system with cap frame and cap driver]] | ||
A 270 cap system allows for embroidery on the surface of caps up to a maximum of 270 degrees. | A 270 cap system allows for embroidery on the surface of caps up to a maximum of 270 degrees. For practical purposes, this is essentially ear to ear. With a 270 cap system, a user has the ability to embroider both the front and sides of the cap without the need to re-hoop the cap and sew out a separate design. | ||
[[File:270_cap_system.jpg|right|thumb|alt=270 degree cap system|270 degree cap system ready to embroider]] | [[File:270_cap_system.jpg|right|thumb|alt=270 degree cap system|270 degree cap system ready to embroider]] | ||
Revision as of 19:58, 10 October 2013
A 270 cap system allows for embroidery on the surface of caps up to a maximum of 270 degrees. For practical purposes, this is essentially ear to ear. With a 270 cap system, a user has the ability to embroider both the front and sides of the cap without the need to re-hoop the cap and sew out a separate design.
Nowadays, the 270 degree cap system is standard. Prior to the 270 cap system becoming standard, cap systems could only embroider on the front of the cap (not the sides).