Main Feactures and Functions for the H-series,
Main Feactures and Functions for the H-series
- Accurate Frame Drive
For stable frame driving,special stepping (pulse) motors are used. These motors feature an almost permanent life and pin-point accuracy.
- Automatic Needle Bar Selector (Pantented)
Colors (needle bars) can be selected up to 99 times in any desired sequence.
- Threas Tension Releasing Device (Patented)
During sewing. Tension is automatically released an all unused threads.
- Independent Take-up Lever Drive System:
The take-up lever only for the needle bar being used, operates while the other levers are at rest: this prevents the threasd from being entangled. This system also allows the threads to run smoothy for constant ATH trimming.
- Both Binary and Ternary Tape formalts can be used
- Speed Change
Speeds can be automatically changed between High and Low ranges by tape code data: key operations also allow you to adjust the speeds as required.
- Desing Coordinate
A desing can be mirrored both horizontally and vertivally and also rotated in 90-degree increments: 8-diferrent positions can be createcd
- Memory System
Up to 99 desings can be memorized in this system with the remaining capacity displayed in the stitches. (A standard 128.000- stitch memory card is included.)
- Automatic Repeat
A desing can be repeatedly stitche-d up to 9 times during memory operation.
- Frame back function
When a design is damaged by thread Breakage, the frame can be stitched back for repairs up to 500 stitches during memory and tape operation. Also, as soon as the single-head operation to restitch the damaged part is completed, the other heads resart sewing.
- Frame Forward
The frame can be stepped forward without stitching up to the end of the design.
- Scaling Up/Down Function
A design can be scaled up or down in 1-% increments from 50% up to 200%.
- Return Origin
Simple key operations return the frame to the design starting point.
- Offset Function
In addition to the design starting point, a secondary starting point can be set for automatic operation: this function facilitates frame changing, thread trimming, etc.
- Display Function
Various messages are digitally displayed: R.P.M., available memory, and stitch count, stop factors emergency stop codes, etc.
- Automatic Thread Trimming Device (ATH)
This device has the function of trimming both upper and under threads automatically at the same time by pre-punched tape code when embroidery is completed, color change is performed, or stitching is jumped from one design to another.