File:SonoScape C352.jpg

when the wire colors don't match

How to repair my headphones, when the wire colors don't match ?here's the problem, My headphones broke due to lame construction, so i decided to fix them myself like i usually do. but this time I'm lost.

each headphone cup has two sets of wires. Both are have one Yellow (Y) and one Red (R) however the wire coming from the audio jack has something different. it has Yellow, Red, Blue(B) and Green (G)

I've connected Y to Y,SonoScape Ultrasound Transducer R to R on one cup, And B to Y and G to R on another. only one cup works. I've tried switching G and B places, however still, only one cup works. can someone please help?Where did this audio jack come from? With 4 different wires it sounds like a cable from an old set of iPhone compatible headphones with an inline remote. Does the audio jack have 2 black rings or 3?

You'll need to do a continuity check on the wires and connectors. See what part of the connector each wire is attached too. The tip of the connector is typically your left, first ring is your right and the base is the ground. If your connector has 3 black rings it's an iPhone compatible connector. In which case the tips is left, next ring is right, next ring is ground and the base of the connector is the data pin which you won't use with your headphones.