Difference between revisions of "Barudan BEAT 900 Series"

From Embroidery Machine WIKI
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[file:Barudan_900_Hard_Drive_Upgrade.jpg|thumb|right|alt=The CONTROL BOX of a Barudan 900 series contains the Hard Drive|The CONTROL BOX of a Barudan 900 series contains the Hard Drive]]
[[file:Barudan_900_Hard_Drive_Upgrade.jpg|thumb|right|alt=The CONTROL BOX of a Barudan 900 series contains the Hard Drive|The CONTROL BOX of a Barudan 900 series contains the Hard Drive]]
[[file:Barudan_900_Keyboard.jpg|thumb|right|alt=Keyboard or Pennant system for a Barudan 906 with dual [[FloppyToUSB]] upgrade|Keyboard or Pennant system for a Barudan 906 with dual [[FloppyToUSB]] upgrade]]
[[file:Barudan_900_Keyboard.jpg|thumb|right|alt=Keyboard or Pennant system for a Barudan 906 with dual [[FloppyToUSB]] upgrade|Keyboard or Pennant system for a Barudan BEAT 906 embroidery machine]]
The [[Barudan]] BEAT 900 Series was one of the last series of the long-running "BEAT Series" by Barudan. The 900 Series was manufactured from 1993 - 1996.  
The [[Barudan]] BEAT 900 Series was one of the last series of the long-running "BEAT Series" by Barudan. The 900 Series had the distinction of being PC-based with CPU, hard drive, floppy drives and a monitor. The 900 Series was manufactured from 1993 - 1996.  


==Barudan 900 Series Features==
==Barudan 900 Series Features==
Line 7: Line 7:


==900 Series Models==
==900 Series Models==
The Barudan 900 Series came in the Barudan BEAT 902 (2-head) and BEAT 906 (6-head) model.  There were also 7-needle and 9-needle models. The Barudan models with YS were the 7-needle machines and the ZN models had 9 needles (these were the first 9-needle Barudan models produced).
The Barudan 900 Series came in the Barudan BEAT 902 (2-head) and BEAT 906 (6-head) model.  There were also 7-needle and 9-needle models. The Barudan models with YS were the 7-needle machines and the ZN models had 9 needles (these were the first 9-needle Barudan models produced).


The Z in the ZN stands for ''Flat Head'' instead of the ''Turret'' head original used.  The ''Turret'' heads were used to allow more working area. The turret heads were not very commonly used after around 1995 but could still be found on newer machines.
The ZN Series feature inline needles (also called "flat-head" type) with individual take-up levers (see video below), and the YS Series featured the Barudan round needle geometry (also called "turret" style or "cylinder" style) with individual take-up levers (see video below). The turret-style heads were not very commonly used after around 1995.


==900 Series Upgrade and Repair==
==900 Series Upgrade and Repair==


The 90X machines came with hard disk drives which unfortunately had a high failure rate. However, the hard drive can be upgraded with flash drive by PLRElectronics.  [[PLRElectronics]] is one of the few companies that will repair/replace the hard drives and electronics on these older machines.
[[File:Barudan900_usb.jpg |thumb|right|alt=Barudan 900 series with floppy drive replaced with USB|Barudan 900 series with floppy drive replaced with USB flash drive]]
 
 
The 900 series embroidery machines came with dual floppy disk drives which unfortunately had a high failure rate. However, the floppy drives can be replaced with a [[floppy disk emulator]] by PLRElectronics.  [[PLRElectronics]] is one of the few companies that will repair/replace the hard drives and electronics on these older machines.


===See Also===
===See Also===

Latest revision as of 17:24, 29 October 2013

The CONTROL BOX of a Barudan 900 series contains the Hard Drive
The CONTROL BOX of a Barudan 900 series contains the Hard Drive
Error creating thumbnail: Unable to save thumbnail to destination
Keyboard or Pennant system for a Barudan BEAT 906 embroidery machine

The Barudan BEAT 900 Series was one of the last series of the long-running "BEAT Series" by Barudan. The 900 Series had the distinction of being PC-based with CPU, hard drive, floppy drives and a monitor. The 900 Series was manufactured from 1993 - 1996.

Barudan 900 Series Features

The 900 Series was a dramatic change from the Barudan BEAT 800 Series. The BEAT 900 series were 286 or 486 PC based and came with an SVGA color monitor and two disk drives (for reading and writing). As with other BEAT Series machines, these models included a keyboard for monogram lettering (and came with lettering fonts and editing software). The 900 series also came with a cap frame system.

900 Series Models

The Barudan 900 Series came in the Barudan BEAT 902 (2-head) and BEAT 906 (6-head) model. There were also 7-needle and 9-needle models. The Barudan models with YS were the 7-needle machines and the ZN models had 9 needles (these were the first 9-needle Barudan models produced).

The ZN Series feature inline needles (also called "flat-head" type) with individual take-up levers (see video below), and the YS Series featured the Barudan round needle geometry (also called "turret" style or "cylinder" style) with individual take-up levers (see video below). The turret-style heads were not very commonly used after around 1995.

900 Series Upgrade and Repair

Barudan 900 series with floppy drive replaced with USB
Barudan 900 series with floppy drive replaced with USB flash drive


The 900 series embroidery machines came with dual floppy disk drives which unfortunately had a high failure rate. However, the floppy drives can be replaced with a floppy disk emulator by PLRElectronics. PLRElectronics is one of the few companies that will repair/replace the hard drives and electronics on these older machines.

See Also

External Links