Difference between revisions of "Embroidery Machine Service Guide"

From Embroidery Machine WIKI
Jump to navigation Jump to search
Line 30: Line 30:
The Needle Depth is how far the needle goes down at it max low point.  If the needle goes too low, it can break and if the needle does not go far enough, the machine might break threads or skip stitches.
The Needle Depth is how far the needle goes down at it max low point.  If the needle goes too low, it can break and if the needle does not go far enough, the machine might break threads or skip stitches.


{{#ev:youtube|dMH0bHeiRNg|100|right|This is an embedded video!}}
{{#ev:youtube|dMH0bHeiRNg|300|center|Butterfly Needle Depth Ajustment}}
 
begtl_cPlvE


===Hook Timing===
===Hook Timing===
===Needle Stop Position===
===Needle Stop Position===

Revision as of 19:30, 29 August 2013

Embroidery Machine running the I-Test

This Embroidery Machine Service Guide should contain brief info on very basic embroidery machine repairs.

{{

 {{#invoke:Namespace detect|main}}

| type = | image = {{#if:|[[file:{{{image}}}|40px|Notice]]}} | imageright = | class = | style = | textstyle =

| text = {{#if:|

{{{header}}}

}}Before attempting any service on an embroidery machine, it is recommend to first contact an embroidery machine technician.

| small = | smallimage = {{#if:|[[file:{{{image}}}|30px|Notice]]}} | smallimageright = | smalltext = | subst = {{subst:substcheck}} | date = | name = Notice }} {{

 {{#invoke:Namespace detect|main}}

| type = | image = {{#if:|[[file:{{{image}}}|40px|Notice]]}} | imageright = | class = | style = | textstyle =

| text = {{#if:|

{{{header}}}

}}Generally when an operator has issues with an embroidery machine, the issues are less likely to be a mechanical problem with the machine but more than likely another factor.

| small = | smallimage = {{#if:|[[file:{{{image}}}|30px|Notice]]}} | smallimageright = | smalltext = | subst = {{subst:substcheck}} | date = | name = Notice }} {{

 {{#invoke:Namespace detect|main}}

| type =

| image = {{#if:Stop_hand_nuvola_svg.png|

Error creating thumbnail: Unable to save thumbnail to destination

}}

| imageright = | class = | style = | textstyle =

| text = {{#if:|

{{{header}}}

}}Before doing anything to the machine, its recommended to run a known good design with known good thread and with only a couple pieces of backing and good scrap material to verify the problem is mechanical.

| small = yes | smallimage = {{#if:Stop_hand_nuvola_svg.png|Notice}} | smallimageright = | smalltext = | subst = {{subst:substcheck}} | date = | name = Notice }}

The embroidery troubleshooting guide can be reviewed first to verify the symptoms and resolutions offered.

Basic Operations

Embroidery Machine Bottom Tensions
Embroidery Machine Bottom Tensions

Tensions

Thread Tensions are very important and probably one of the most underestimated issues in embroidery. The thread tensions should be constantly checked.

Bobbin Tensions

Error creating thumbnail: Unable to save thumbnail to destination
Embroidery Machine Bobbins

The bobbin tension should be adjusted when the bobbin is changed. Once the bobbin tension is set, it should not be changed again until it is replaced with another new bobbin.

Thread Tensions

The thread tensions on the embroidery machine should be checked constantly. Do not bother setting the thread tensions without setting the bobbin tension first.

False Thread Breaks

False Thread Breaks are when the machine stops for a thread break but, the thread is not broken.

Usually false thread breaks occur when the machine is not properly threaded.

Common Adjustments

Needle Depth

The Needle Depth is how far the needle goes down at it max low point. If the needle goes too low, it can break and if the needle does not go far enough, the machine might break threads or skip stitches.

{{#ev:youtube|dMH0bHeiRNg|300|center|Butterfly Needle Depth Ajustment}}

begtl_cPlvE

Hook Timing

Needle Stop Position