Difference between revisions of "Shipping Procedure for Crates and Pallets (small machines)"

From Embroidery Machine WIKI
Jump to navigation Jump to search
Line 4: Line 4:
Small equipment can be any machines that will fit on a [http://en.wikipedia.org/wiki/Pallet pallet] or inside a crate.  Generally machines with 1 - 6 heads.  Usually machines larger than or equal to 6 heads are better shipped LTL
Small equipment can be any machines that will fit on a [http://en.wikipedia.org/wiki/Pallet pallet] or inside a crate.  Generally machines with 1 - 6 heads.  Usually machines larger than or equal to 6 heads are better shipped LTL


{{for|the Tajima TMFX machine info|Shipping Procedures for LTL or a Full Truck (large machines)}}
{{for|the Large Machine shipping info|Shipping Procedures for LTL or a Full Truck (large machines)}}
 


==Packing==
==Packing==

Revision as of 22:47, 14 August 2013

Several small machines being unloaded from a flat bed wrecker

The following Shipping Procedures for Crates and Pallets (small machines) can be used when transporting small embroidery equipment.

Small equipment can be any machines that will fit on a pallet or inside a crate. Generally machines with 1 - 6 heads. Usually machines larger than or equal to 6 heads are better shipped LTL

Packing

To ensure the machine purchased by the client arrives in the best condition possible, please follow these simple instructions:

  • Package all the accessories in boxes. Tape the boxes and label the boxes with the buyers contact info.
  • Make sure the machine is on the middle needle so that the head is centered. If the head is not centered, it might vibrate loose.
  • Thread should be pulled about 1 foot out from the tip of the needles and then tied off together and attached to the thread holders.
  • Spools of thread should be pulled about 1 foot out from the tip of the needles and then tied off together and attached to the thread holders.
  • If the machine has a thread rack that can very easily be removed or lowered then remove or lower it.
  • Crate the machine or place it on top of a pallet with all the accessories. Pallets can usually be found for free at the back of industrial parks or warehouse districts. They can also be found at home improvement stores and are also usually given away for free.
    Error creating thumbnail: Unable to save thumbnail to destination
    The classic wooden pallet
  • Put stretch film or plastic to protect the machine from the weather or other merchandise that is on the truck.
  • Strap the machine to the pallet or the crate so it does not shift when the truck is moving.
  • Take a picture of the crate or pallet and send it to intlsales (At) tewh com
  • Ask the driver to sign the BL and send it by fax to 817-223-4462