Difference between revisions of "Tajima TME-DC"

From Embroidery Machine WIKI
Jump to navigation Jump to search
(Created page with "{{Infobox machineType | embSeries = TME-DC | embName = Tajima | embCompanyImage = tajima_DC906_Green.jpg | embCompanyImageDesc = A Tajima TME-DC906 Green model 6 head 9 needle...")
 
Line 9: Line 9:
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]
| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]
}}
}}
The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before.  Unlike the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive.  The Tajima DC series also came with upgraded control panel, motors, and motor controllers.   Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price.  The Tajima TME-DC models were available in 6, 12, 15 and 20 heads.  The early machines built in the early and mid 1990s were mostly 9 needles.  Around year 2000 most all models were standard 12 needles.
 
The [[Tajima]] TME-DC was the next model up from the TME-HC model produced the previous years before.   
 
Unlike the [[TME-HC]] machine, the Tajima TME-DC models came standard with a Floppy Disk Drive.  The Tajima DC series also came with upgraded control panel, motors, and motor controllers.
 
Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price.  The [[Tajima]] TME-DC models were available in 6, 12, 15 and 20 heads.   
 
The early machines built in the early and mid 1990s were mostly 9 needles.  Around year 2000 most all models were standard 12 needles.


===TME-DC Series===
===TME-DC Series===

Revision as of 20:15, 28 August 2013

{{#invoke:Infobox|infobox}}

The Tajima TME-DC was the next model up from the TME-HC model produced the previous years before.

Unlike the TME-HC machine, the Tajima TME-DC models came standard with a Floppy Disk Drive. The Tajima DC series also came with upgraded control panel, motors, and motor controllers.

Many models of the Tajima DC also came with Hydraulic Tables but, standard removable table tops were still available on some for a lesser price. The Tajima TME-DC models were available in 6, 12, 15 and 20 heads.

The early machines built in the early and mid 1990s were mostly 9 needles. Around year 2000 most all models were standard 12 needles.

TME-DC Series

For the Tajima TME-DC user manual see Tajima TME-DC User Manual

In 1994 Tajima released the TME-DC series embroidery machine.

Tajima TME-DC912 model circa 1994
Tajima TME-DC912 model circa 1994

The TME-DC machine was the first Tajima multihead machine with a floppy drive. The machine can also be upgraded to FloppyToUSB

1994-1996

The first models of the Tajima TME-DC series were green machines. The only green machines were produced 1994 - 1996. Some of the 1996 models might be white color. The machine either had removable tables or hydraulic tables.

The machine was very similar to the earlier TME-HC model but, had upgraded electronics including the control panel, IMM, IDM, motor, motor controller, etc. The machine also had a floppy drive which can be upgraded to Floppy To USB

1997-1999

The TME-DC machine changed color scheme and logos around 1996. The 1997 models of the TME-DC series were white but were otherwise very similar to the previous TME-DC machines. The white version was available later in 12 needles.

TME-DC Specifications

Model Heads Needles EMB Space / Head Max SPM Pwr Cons. Years Color
TME-DC906 (G1) 6 9 emb Space SPM POWEW 1994-1996 Green
TME-DC912 (G1) 12 9 emb Space SPM POWEW 1994-1996 Green

Template:TajiimaFooter