Toyota 820A/830 Electronics

From Embroidery Machine WIKI
Jump to navigation Jump to search

{{#invoke:Infobox|infobox}}

Toyota Electronics

Error creating thumbnail: Unable to save thumbnail to destination
Toyota Control Panel

The Toyota 820A/830 machine electronics consist of the main power box, control panel and various other small boards such as head cards and sensors.

List of boards generally found on the Toyota 820A/830 models:

Power Box

The Toyota 820A/830 Power Box houses the Toyota 820A/830 main power boards.

Control Panel

Shown in picture. The Control Panel contains all the control panel boards and is used for operating the embroidery machine.

Mother Board

Toyota 820A/830 MOTHER BOARD

The Mother Board is the main computer for the Toyota 820A/830 machines. The Mother Board also contains the ROM chips which have different software between the 2 machines.

Troubleshooting and Error Messages

The Toyota 820A/830 machine can produce the following error messages

Needle Case Error
Needle Case Error
Internal Connect Error
Internal Connect Error
Sewing Motor Lock
Sewing Motor Lock

Toyota 820A/830 Electronics Repairs

PLRElectronics specialized in the repair of all the Toyota 820A and the Toyota 830 electronics. Generally it is much cheaper to have the Toyota electronics repaired rather than buying very expensive new boards.

USB Upgrade

External USB Embroidery Black Box reader for the Toyota 820A and Toyota 830 Embroidery Machines
External USB Embroidery Black Box reader for the Toyota 820A and Toyota 830 Embroidery Machines

Designs are typically transferred to the Toyota 820A and 830 machines via a 25 pin serial cable. There is a replacement external USB reader that connects to the 25 pin serial cable that can be purchased after market.

The USB Upgrade for the 820A and 830 can be purchased at: USB Flash Reader Embroidery Machine Transfer System

See also

References

External links