Outdoor Lamp Posts
Not only does outdoor lighting significantly improve the aesthetic of your home at night, but they also help function as a safety mechanism by illuminating the nearby surroundings and making it easier to spot anyone skulking about.There are, however, quite a few ways to mount outdoor lights - each with their own pros and cons.Standalone LightsAn increasing number of outdoor LED lights can be plopped down with little need to spend time and effort mounting them to any particular surface. This is especially true for solar-powered outdoor lamps, where you don't even need to run a wire to power them up. These standalone lights are thus the easiest lights to install and reposition as needed.The main downside of standalone lights, however, is how easy it is to detach or vandalize the lights. Their unfixed nature makes them ideal targets for casual thieves or vandals; making them rather impractical to work with when in a high-risk area. The risk of accidentally knocking them over is also a bit high, especially when placed in high-traffic areas. You could always secure them in place with more permanent measures, like tying them up or bolting them in place, though you'll have to sacrifice their portability to do so.
Protruding MountsProtruding mounts allow outdoor LED lights to extend from the wall, ground or ceiling. This allows the lights to illuminate a wider area without having to stick out too much. You could also cover the light with a shade in order to direct the light at a very specific area; minimizing light pollution in the process.The problem with protruding mounts, however, is that they are rather easy to accidentally bump into - especially when they are turned off at night. Protruding LED landscape lights don't protrude far enough to be easily seen, but they extend far enough for a boot, shoulder, or protruding beam to slam into.Flush MountsFlush mounts allow you to bury lights into the walls, ceilings or ground. The recessed bulbs allow you to divert light right where you want it, and makes it nigh impossible for you or anyone else to damage the lights by accident. This also makes it difficult for thieves and vandals to do what they want to do, though a determined crook will still be able to damage the lights.The main downside, however, is that flush mounts are not that good at spreading light over a wide area. This is due to the bulbs being buried into a hole, which focuses the light. You could pick up flush mounts with bulbs that protrude slightly from the lamp face, but you still won't get as much light coverage as the other methods.
Pole MountsYou have the option of mounting outdoor LED lights on elevated poles. This significantly increases the area that your lights cover. Attach the lights on a high enough pole, and the lights become extremely difficult for thieves and vandals to target.The primary downside of using pole mounts, however, is that they are often ugly and obtrusive. They will stick out like a sore thumb, which can be a problem when you want to install your outdoor LED lights in an aesthetically pleasing manner. Decorative Light panels, Outdoor Post Lamps, Commercial Outdoor Lamp Posts