Difference between revisions of "Tajima TME-DC Electronics"

Latest revision as of 13:22, 8 September 2013

For {{#if:the Tajima TME-DC machine info|the Tajima TME-DC machine info|other uses}}, see Tajima TME-DC{{#if:|{{#if:|, [[:{{{3}}}]], {{#if:|[[:{{{4}}}]], and [[:{{{5}}}]]|and [[:{{{4}}}]]}}| and [[:{{{3}}}]]}}}}.

{{#invoke:Infobox|infobox}} The Tajima TME-DC was one of the longest produced Tajima models.

TME-DC Electronics

The Tajima TME-DC machine electronics consist of the main power box (underneath the machine), the control panel, DU-10 (XY) and various other small boards such as head cards, joint cards, and communications cards.

{{

 {{#invoke:Namespace detect|main}}

| type = | image = {{#if:|[[file:{{{image}}}|40px|Notice]]}} | imageright = | class = | style = | textstyle =

| text = {{#if:|

{{{header}}}

}}The Tajima TMFD machine used the same electronics as the Tajima TME-DC machine. When reading this article, this model TME-DC can be replaced with TMFD

| small = | smallimage = {{#if:|[[file:{{{image}}}|30px|Notice]]}} | smallimageright = | smalltext = | subst = {{subst:substcheck}} | date = | name = Notice }}

List of boards generally found on the Tajima TME-DC models:

Control Panel

Tajima TME-DC Control Panel with optional FloppyToUSB installed

The TME-DC Control Panel houses the Tajima TME-DC's main computer boards which include the control panel, LCD screen, IDM card and Floppy Drive or Floppy To USB unit. The Control Panel can be opened by hand from the back with the 2 flat head hand screws.

It is preferred that the entire control panel be shipped when undergoing repairs on any of the Control Panel component.

DU-10

DU-10 Dual Unit X and Y Box

The DU-10 unit precedes the previous DU-6, DU-7 and DU-8 models. The DU-10 contains 2 identical cards. The cards in the DU-10 unit are the X and Y movements for the Tajima machine.

The X and Y cards/cables can be swapped for testing purposes. Be sure the machine is turned off when testing.

The X and Y cards also have potentiometers for increasing the power to the machines motors. These potentiometers should never be touched unless by a technician. Also, these potentiometers are set at the factory or at installation and are set specifically for the X or the Y motors both of which need different power input.

Errors

When the X or Y boards start to go back either an amber light will be seen on the box or the movement either direction might sound very rough. The embroidery might not look as good or it might look scaled down on one axis. The pantograph might be easy to move in one direction or another while the machines power is still on.

IMM Card and IDM Card

Tajima IMM Card

The IMM Card and IDM Card are communication cards between the control panel and the main control box. If the machine does not boot up but displays info on the screen such as software version numbers, then the IMM or IDM cards might need to be replaced or repaired.

The following has been taken from http://www.plrelectronics.com/lab/Tajima/Repair/index.php

Tajima part number ED5601000000

There are two circuit boards responsible for most errors which are the Tajima IDM and Tajima IMM and IMM2 cards, in the control panel and in the lower back of the machine, respectively. There are several versions of these boards for the TME-DC Type 1 (Green) and Type 2/Type 3 (White control panel). Other errors on the Tajima TMFD/TME-DC type of machine are due to defective brake boxes (attached to the main motor of the machine) and the main motor itself in the type2 and type3.

The Tajima TME-DC embroidery machine also has a floppy drive unit which can become defective over the years, and the DU-10 type of XY control boards.

Errors

Errors include the d-1.xx, n-1.xx errors, where the control panel becomes frozen. Other errors include the color change function acting erratically, the main motor unable to function, the brake box not being able to stop the shaft at the proper location (or hold it), the main motor not functioning at all due to a E-002 error on the newer type brake box, and the mentioned floppy drive problems.

The d-1.00 error, d-1.01 error, d-1.06 error, can be about any number between 1.00 and 1.14.

The DU-10 cards, which control the Tajima's X and Y-axis, can also degrade and be damaged; if there is jerky movement or the lights on each card are orange or red, please let us know.

PLRElectronics also states Send your Tajima IMM card or IDM board in for repair today!

Color change card

Power to the color change motor. Also reads the color change potentiometer and some solenoids.

Head card

When head cards start to go bad, the machine might report false thread breaks. Before replacing or repairing its recommend to clean the connectors where the check springs touch the copper stopper.

Troubleshooting and Error Messages

The Tajima TME-DC machine can produce the following error messages

Tajima Error 211: Main shaft not at fixed position. Spin manually or use the ATH function.
Tajima Error 225: Stitching outside of cap frame space.
Tajima Error 281: Color change cannot reach needle position. Check for bind. Check potentiometer.
Tajima Error 291: Thread break.
Tajima Error 2B1: Tape reader error. No reader is detected.
Tajima Error 2B2: Tape reader error. Data is corrupted.
Tajima Error 2B3: Tape reader error. End code data is incorrect.
Tajima Error 2B4: Tape reader error. Data is out of order. Please reset all units.
Tajima Error 2B5: Sequin data has an error.
Tajima Error 2B6: Tape reader error. No data coming in.
Tajima Error 2B7: Please load data first.
Tajima Error 2B8: Trying to run machine while data is still loading.
Tajima Error 2B9: Memory writing error. Try erasing all memory.
Tajima Error 2BA: Memory full. Erase designs.
Tajima Error 2BB: Cannot frame back any more.
Tajima Error 2BC: No data in memory here.
Tajima Error 2C2: Incorrect option, please change.
Tajima Error 2CE: Beam sensor is tripped, make sure both mirrors are aligned.
Tajima Error 311: Main motor not spinning. Check the S-card if it is active. Check main shaft if it is bound. This error generally requires circuit board repair of the S-Card, contact PLRElectronics for repair information
Tajima Error 312: Main shaft encoder giving incorrect signal. Check connections.
Tajima Error 316: The S-card is giving an error signal. Check card.
Tajima Error 322: The X-card is giving an error signal. Check card. This error generally requires circuit board repair of the X-Card, contact PLRElectronics for repair information
Tajima Error 323: The Y-card is giving an error signal. Check card. This error generally requires circuit board repair of the Y-Card, contact PLRElectronics for repair information
Tajima Error 382: Color change motor is not moving. Check for binds. Check connections.
Tajima Error 383: The color change location is not valid for running the head. Please check or re-center.
Tajima Error 3D1: Battery error. This error generally requires circuit board repair of the Control Panel, contact PLRElectronics for repair information
Tajima Error 3D6: CPU card detects problem with main program. Reinstall.
Tajima Error B01: Floppy disk format is not correct. Is the disk bad, or the floppy drive configured correctly?
Tajima Error B02: Floppy file system is not correct. Is the disk bad, or the floppy drive configured correctly?
Tajima Error B03: Floppy is marked as read-only.
Tajima Error B04: Floppy drive says no disk is inserted. Check drive configuration.
Tajima Error BC1: No Tajima designs found.
Tajima Error BC2: Cannot overwrite same name design.
Tajima Error BC4: Floppy write failed. Re-try.
Tajima Error BC5: Floppy disk is full.
Tajima Error C01: No response to floppy drive activation signal. Check drive configuration.
Tajima Error 1B1: Stop due to frame stepping.
Tajima Error 1B2: Stop due to stop code.
Tajima Error 1B3: Stop due to end of design.
Tajima Error 1B4: Stop due to thread trim.
Tajima Error 1B5: Stop due to sequin code.
Tajima Error 1C1: Stop due to stop button.

TME-DC Electronics Repairs

PLRElectronics specialized in repair of all the Tajima TME-DC electronics. Generally it is much cheaper to have the Tajima electronics repaired rather than buying very expensive new boards.

USB Upgrade

Pair of Floppy To USB drives

External USB Embroidery Reader, Embroidery Black Box

The USB Upgrade for the TME-DC can be found at:

External Reader

The TME-DC External Reader (Embroidery Black Box) can be purchased at: USB Flash Reader Embroidery Machine Transfer System

Internal Reader (Floppy to USB)

The TME-DC (Floppy To USB) can be purchased at: Floppy To USB Upgrade

External links

PLRElectronics - Tajima Repair - Electronic Repair and Troubleshooting for Tajima circuit boards

@@ Line 8: / Line 8: @@
 | embSeriesHeads =  6 - 29
 | embSeriesNeedles = 9 - 15
-| embSeriesInput = Floppy, Serial, Parallel, [[FloppyToUSB]]
+| embSeriesInput = Floppy, Serial, Parallel, [[Floppy To USB]]
 }}
 The [[Tajima TME-DC]] was one of the longest produced Tajima models.
 ==TME-DC Electronics==
-[[File:TME-DCpower2.jpg|thumb|left|alt=Tajima TME-DC Power Box.|Tajima TME-DC Power Box]]
+The Tajima TME-DC machine electronics consist of the main power box (underneath the machine), the control panel, DU-10 (XY) and various other small boards such as head cards, joint cards, and communications cards.
-The Tajima TME-DC machine electronics consist of the main power box, control panel, DU-10 (XY) and various other small boards such as head cards and joint cards.
+{{notice|The [[Tajima TMFD]] machine used the same electronics as the Tajima TME-DC machine.  When reading this article, this model TME-DC can be replaced with TMFD}}
 List of boards generally found on the Tajima TME-DC models:
+===Control Panel===
+[[File:TME-DC_usb2.jpg |thumb|right|alt=Tajima TME-DC Control Panel with optional [[FloppyToUSB]] installed|Tajima TME-DC Control Panel with optional [[FloppyToUSB]] installed]]
+The TME-DC Control Panel houses the Tajima TME-DC's main computer boards which include the control panel, LCD screen, IDM card and Floppy Drive or [[Floppy To USB]] unit.  The Control Panel can be opened by hand from the back with the 2 flat head hand screws.
+It is preferred that the entire control panel be shipped when undergoing repairs on any of the Control Panel component.
 ===DU-10===
-{{DU-10 Info}}
+[[File:DU-10.jpg|thumb|right|alt=DU-10 Dual Unit X and Y Box|DU-10 Dual Unit X and Y Box]]
+The DU-10 unit precedes the previous DU-6, DU-7 and DU-8 models.  The DU-10 contains 2 identical cards.  The cards in the DU-10 unit are the X and Y movements for the Tajima machine.
+The X and Y cards/cables can be swapped for testing purposes.  Be sure the machine is turned off when testing.
+The X and Y cards also have potentiometers for increasing the power to the machines motors.  These potentiometers should never be touched unless by a technician.  Also, these potentiometers are set at the factory or at installation and are set specifically for the X or the Y motors both of which need different power input.
-===S-Card===
+====Errors====
-Power and control of the main shaft motor.  This is the largest motor on the machine.  This is the only card that has an optional plug in the back, which are labeled 100V and 200V.    If you have 110V power then either plug works but it is not recommended to mismatch; although the 200V only slightly leeches off of the main card's ability to provide power to the rest of the system, if anything happens to the S-card then the main card will also be damaged.    If you have 200V or more from your wall power, then you have no choice but to use the 200V plug; using the 100V plug with 200V wall input may damage the S-card.
+When the X or Y boards start to go back either an amber light will be seen on the box or the movement either direction might sound very rough.  The embroidery might not look as good or it might look scaled down on one axis.  The pantograph might be easy to move in one direction or another while the machines power is still on.
+===IMM Card and IDM Card===
+[[File:tmedc_imm_card1.jpg|thumb|right|alt=Tajima IMM Card|Tajima IMM Card]]
+The IMM Card and IDM Card are communication cards between the control panel and the main control box.  If the machine does not boot up but displays info on the screen such as software version numbers, then the IMM or IDM cards might need to be replaced or repaired.
+The following has been taken from http://www.plrelectronics.com/lab/Tajima/Repair/index.php
+Tajima part number ED5601000000
+There are two circuit boards responsible for most errors which are the Tajima IDM and Tajima IMM and IMM2 cards, in the control panel and in the lower back of the machine, respectively. There are several versions of these boards for the TME-DC Type 1 (Green) and Type 2/Type 3 (White control panel). Other errors on the Tajima TMFD/TME-DC type of machine are due to defective brake boxes (attached to the main motor of the machine) and the main motor itself in the type2 and type3.
+The Tajima TME-DC embroidery machine also has a floppy drive unit which can become defective over the years, and the DU-10 type of XY control boards.
+====Errors====
+Errors include the d-1.xx, n-1.xx errors, where the control panel becomes frozen. Other errors include the color change function acting erratically, the main motor unable to function, the brake box not being able to stop the shaft at the proper location (or hold it), the main motor not functioning at all due to a E-002 error on the newer type brake box, and the mentioned floppy drive problems.
+The d-1.00 error, d-1.01 error, d-1.06 error, can be about any number between 1.00 and 1.14.
+The DU-10 cards, which control the Tajima's X and Y-axis, can also degrade and be damaged; if there is jerky movement or the lights on each card are orange or red, please let us know.
+[[PLRElectronics]] also states ''Send your Tajima IMM card or IDM board in for repair today!''
 ===Color change card===
@@ Line 27: / Line 59: @@
 ===Head card===
-One card per head.  Detects thread break signals from the head assembly, and powers some solenoids.  If one is bad, it can interfere with signals of all, including the color change card.   When configuring the control panel, it also asks to pick a head card type 1 or type 2, and if the choice is wrong then all thread break signals will be wrong and erratic.
+When head cards start to go bad, the machine might report false thread breaks.  Before replacing or repairing its recommend to clean the connectors where the check springs touch the copper stopper.
-===Control Panel===
-[[File:TME-DC_usb2.jpg |thumb|right|alt=Tajima TME-DC Control Panel with optional [[FloppyToUSB]] installed|Tajima TME-DC Control Panel with optional [[FloppyToUSB]] installed]]
-The TME-DC Control Panel houses the Tajima TME-DC's main computer boards which include the control panel, LCD screen and Floppy Drive or [[FloppyToUSB]] unit.  The Control Panel can be opened by hand from the back with the 2 flat head hand screws.  It is preferred that the control panel when undergoing repairs on any of the Control Panel component.
 ==Troubleshooting and Error Messages==
@@ Line 54: / Line 82: @@
 ;Tajima Error 2C2: Incorrect option, please change.
 ;Tajima Error 2CE: Beam sensor is tripped, make sure both mirrors are aligned.
-;Tajima Error 311: Main motor not spinning. Check the S-card if it is active. Check main shaft if it is bound.  ''This error generally requires circuit board repair of the S-Card, contact [http://www.plrelectronics.com PLRElectronics] for repair information''
+;Tajima Error 311: Main motor not spinning. Check the S-card if it is active. Check main shaft if it is bound.  ''This error generally requires circuit board repair of the S-Card, contact [[PLRElectronics]] for repair information''
 ;Tajima Error 312: Main shaft encoder giving incorrect signal. Check connections.
 ;Tajima Error 316: The S-card is giving an error signal. Check card.
-;Tajima Error 322: The X-card is giving an error signal. Check card.  ''This error generally requires circuit board repair of the X-Card, contact [http://www.plrelectronics.com PLRElectronics] for repair information''
+;Tajima Error 322: The X-card is giving an error signal. Check card.  ''This error generally requires circuit board repair of the X-Card, contact [[PLRElectronics]] for repair information''
-;Tajima Error 323: The Y-card is giving an error signal. Check card.  ''This error generally requires circuit board repair of the Y-Card, contact [http://www.plrelectronics.com PLRElectronics] for repair information''
+;Tajima Error 323: The Y-card is giving an error signal. Check card.  ''This error generally requires circuit board repair of the Y-Card, contact [[PLRElectronics]] for repair information''
 ;Tajima Error 382: Color change motor is not moving. Check for binds. Check connections.
 ;Tajima Error 383: The color change location is not valid for running the head. Please check or re-center.
-;Tajima Error 3D1: Battery error.  ''This error generally requires circuit board repair of the Control Panel, contact [http://www.plrelectronics.com PLRElectronics] for repair information''
+;Tajima Error 3D1: Battery error.  ''This error generally requires circuit board repair of the Control Panel, contact [[PLRElectronics]] for repair information''
 ;Tajima Error 3D6: CPU card detects problem with main program. Reinstall.
 ;Tajima Error B01: Floppy disk format is not correct. Is the disk bad, or the floppy drive configured correctly?
@@ Line 81: / Line 109: @@
 ==TME-DC Electronics Repairs==
-'''[http://www.plrelectronics.com PLRElectronics]''' specialized in repair of all the Tajima TME-DC electronics.  Generally it is much cheaper to have the Tajima electronics repaired rather than buying very expensive new boards.
+[[PLRElectronics]] specialized in repair of all the Tajima TME-DC electronics.  Generally it is much cheaper to have the Tajima electronics repaired rather than buying very expensive new boards.
 ==USB Upgrade==
@@ Line 96: / Line 124: @@
 ==See also==
 *''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Repair/index.php Tajima Repair - Electronic Repair and Troubleshooting for Tajima circuit boards]
+<!--==References==
-==References==
+{{Reflist|2}}-->
-<!--{{Reflist|2}}-->
 ==External links==
 *''[[PLRElectronics]]'' - [http://www.plrelectronics.com/lab/Tajima/Repair/index.php Tajima Repair - Electronic Repair and Troubleshooting for Tajima circuit boards]

Difference between revisions of "Tajima TME-DC Electronics"

Latest revision as of 13:22, 8 September 2013

Contents