Floppy Disk Drive to USB Upgrade Information

From Embroidery Machine WIKI
Jump to navigation Jump to search
Two Floppy To USB drives - slim size (on left) and standard
Two Floppy To USB drives - slim size (on left) and standard

The FloppyToUSB device is a floppy disk drive emulator that is designed to replace a 3 1/2 floppy drive with a USB drive.

This Floppy Disk Drive to USB Upgrade Information is intended for people looking to replace their Floppy Disk Drives with USB drives.

Known Working Models

The first step is to check if the machine or floppy is on the Known Working Models list.

A complete list of known working USB upgrades can be found at the Known Working USB Models list.

If the machine is on that list, order the corresponding drive from that list at http://www.BuyUSBFloppyUpgrade.com

For example, HAAS HL2 Lathe is listed as drive USB-A001. Drive USB-A001 in that example should be ordered from the above link.


The following table contains the Floppy To USB corresponding drives that has been proven to work successfully on the following machines. If your machine or drive is not on the list, then contact PLRElectronics and they can tell you exactly what drive to order.

Retrieved from "http://wiki.embroiderymachine.com/index.php?title=Floppy_Disk_Drive_to_USB_Upgrade_Information&oldid=3877"