Floppy Disk Drive to USB Upgrade Information

Two Floppy To USB drives - slim size (on left) and standard

The FloppyToUSB device is a floppy disk drive emulator that is designed to replace a 3 1/2 floppy drive with a USB drive.

This Floppy Disk Drive to USB Upgrade Information is intended for people looking to replace their Floppy Disk Drives with USB drives.

For {{#if:a complete list of Known Working Models|a complete list of Known Working Models|other uses}}, see Floppy_To_USB#Known_working_Models{{#if:|{{#if:|, [[:{{{3}}}]], {{#if:|[[:{{{4}}}]], and [[:{{{5}}}]]|and [[:{{{4}}}]]}}| and [[:{{{3}}}]]}}}}.

Known Working Models

The first step is to check if the machine or floppy is on the Known Working Models list.

A complete list of known working USB upgrades can be found at the Known Working USB Models list.

If the machine is on that list, order the corresponding drive from that list at http://www.BuyUSBFloppyUpgrade.com

For example, HAAS HL2 Lathe is listed as drive USB-A001. Drive USB-A001 in that example should be ordered from the above link.

Many of the entries in that list are models of floppy drives and not equipment models. If both the machine and the floppy drive are listed, always go with the USB code listed for the machine and not the drive. Drives are configurable and one type of drive might have many configurations.

Further Questions

If your machine or drive is not on the list, then contact PLRElectronics and they can tell you exactly what drive to order.