Difference between revisions of "Floppy Disk Drive to USB Upgrade Information"

From Embroidery Machine WIKI
Jump to navigation Jump to search
Line 15: Line 15:


Many of the entries in that list are models of floppy drives and not equipment models.  If both the machine and the floppy drive are listed, always go with the USB code listed for the machine and not the drive.  Drives are configurable and one type of drive might have many configurations.
Many of the entries in that list are models of floppy drives and not equipment models.  If both the machine and the floppy drive are listed, always go with the USB code listed for the machine and not the drive.  Drives are configurable and one type of drive might have many configurations.
==Unknown Models==
If the machine make or model is not on the list then there are a few things that need to be known in order to get the correct drive.


==Further Questions==
==Further Questions==
If your machine or drive is not on the list, then contact [[PLRElectronics]] and they can tell you exactly what drive to order.
If your machine or drive is not on the list, then contact [[PLRElectronics]] and they can tell you exactly what drive to order.

Revision as of 21:22, 1 October 2013

Two Floppy To USB drives - slim size (on left) and standard
Two Floppy To USB drives - slim size (on left) and standard

The FloppyToUSB device is a floppy disk drive emulator that is designed to replace a 3 1/2 floppy drive with a USB drive.

This Floppy Disk Drive to USB Upgrade Information is intended for people looking to replace their Floppy Disk Drives with USB drives.

Known Working Models

The first step is to check if the machine or floppy is on the Known Working Models list.

A complete list of known working USB upgrades can be found at the Known Working USB Models list.

If the machine is on that list, order the corresponding drive from that list at http://www.BuyUSBFloppyUpgrade.com

For example, HAAS HL2 Lathe is listed as drive USB-A001. Drive USB-A001 in that example should be ordered from the above link.

Many of the entries in that list are models of floppy drives and not equipment models. If both the machine and the floppy drive are listed, always go with the USB code listed for the machine and not the drive. Drives are configurable and one type of drive might have many configurations.

Unknown Models

If the machine make or model is not on the list then there are a few things that need to be known in order to get the correct drive.

Further Questions

If your machine or drive is not on the list, then contact PLRElectronics and they can tell you exactly what drive to order.