Toyota 820A/830 Electronics
{{#invoke:Infobox|infobox}}
Toyota Electronics
The Toyota 820A/830 machine electronics consist of the main power box, control panel and various other small boards such as head cards and sensors.
List of boards generally found on the Toyota 820A/830 models:
Power Box
The Toyota 820A/830 Power Box houses the Toyota 820A/830 main power boards.
Control Panel
Shown in picture. The Control Panel contains all the control panel boards and is used for operating the embroidery machine.
Mother Board
The Mother Board is the main computer for the Toyota 820A/830 machines. The Mother Board also contains the ROM chips which have different software between the 2 machines.
Troubleshooting and Error Messages
The Toyota 820A/830 machine can produce the following error messages
- Needle Case Error
- Needle Case Error
- Internal Connect Error
- Internal Connect Error
- Sewing Motor Lock
- Sewing Motor Lock
Toyota 820A/830 Electronics Repairs
PLRElectronics specialized in the repair of all the Toyota 820A and the Toyota 830 electronics. Generally it is much cheaper to have the Toyota electronics repaired rather than buying very expensive new boards.
USB Upgrade
Designs are typically transferred to the Toyota 820A and 830 machines via a 25 pin serial cable. There is a replacement external USB reader that connects to the 25 pin serial cable that can be purchased after market.
The USB Upgrade for the 820A and 830 can be purchased at: USB Flash Reader Embroidery Machine Transfer System