Difference between revisions of "Embroidery Black Box"

From Embroidery Machine WIKI
Jump to navigation Jump to search
 
(57 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[File:Tajima_usb_reader_small.jpg |thumb|right|alt=External USB Embroidery Reader|External USB Embroidery Reader]]The ''FloppyToUSB'' is a device that replaces a 3 1/2 floppy drive with a USB drive.  To device is sold by [http://www.PLRElectronics.com: PLR Electronics] and can be purchased at http://www.FloppyToUSB.com.  The Floppy To USB seamlessly replaces the original floppy disk drives with a USB device.  There are no additional software or drivers needed.
[[File:Tajima_usb_reader_small.jpg |thumb|right|alt=External USB-based Embroidery Design Reader|External USB-based Embroidery File Design Reader]]The ''Embroidery Black Box'' is a device that reads USB sticks containing embroidery design files. The design files are transferred to [[Industrial/Commercial Embroidery Machine|embroidery machines]] via parallel or serial cables connected to the embroidery machine's data input port.  The device is distributed by [http://www.TheEmbroideryWarehouse.com: TheEmbroideryWarehouse] and can be purchased at [http://www.embroiderybids.com/cart/USB-Flash-Reader-Embroidery-Machine-transfer-system.html EMBAccess].  The Black Box is the ideal solution for older embroidery machines without a built-in [[floppy disk drive]].  The device is "plug-and-play" in that it requires no software or drivers for installation.


There are 2 versions of the USB upgrade.  There is the Normal and Slim or ''Laptop'' size.  The normal size replaces most all 3 1/2 floppy drives that are the normal PC laptop size.  The Slim or ''Laptop'' size is for replacing drives that are the very thin or laptop sized.
Various cable connectors are available with the Black Box to suit a range of embroidery machines, but the device is sold with one connector.   


The Normal sized Floppy to USB is 34 pins with 4 power pins.  However, there are other versions of the Normal size that have 26 pins and do not have separate power pins.
==History and sales==
[[FILE:USA_FLAG_EMBROIDERY.gif|thumb|right|alt=This device is MADE IN THE USA!|This device is MADE IN THE USA!]]
The Embroidery Black Box was introduced to the market around 2008. The device was created to meet market demand for a low-cost alternative to expensive external embroidery machine floppy drive readers.  The device is sold and used around the world.
 
The Embroidery Black Box is also Made and Developed In The USA and is the only device of its kind Made and Developed In The USA.
 
The device is the only solution for Toyota embroidery machines besides direct PC connect.
 
The device can be purchased at http://www.embroiderybids.com/cart/USB-Flash-Reader-Embroidery-Machine-transfer-system.html
 
This USB Linker to embroidery machines is the ONLY '''USA''' made device on the market.  This device also supports more machines than any other similar device on the market.
 
The distributor of this device claims ''we will meet or beat any competitors invoice price and or warranty''.
 
==Connectors==
[[File:usb_hirose_connectors_barudan.jpg|thumb|right|alt=Barudan adapter Hirose|Barudan adapter Hirose]]
The Black Box device supports both parallel (8-PTR) and serial (RS232C) interfaces. However, there are various types of connectors depending on the model of embroidery machine. Each connector is for a different type of machine input port.  


==History and sales==
The device works on the following embroidery machines: Barudan, Tajima, SWF, Happy, Toyota
The Floppy to USB drive was created in the early 2000s to replace floppy disks and disk drives which were quickly going into extinction. The Floppy to USB drive was created to be used to replace most every 3 1/2 floppy disk drive in existence.  The Floppy to USB drive can be found worldwide as it is a perfect solution for both American and Japanese type drives.  Other well known drives the Floppy to USB drive replaces are IBM, TEAC, Panasonic, Sony, Citizen, Hitachi, Mitsubishi, NEC.
 
The connectors available are:
 
*[[Barudan]]
**Hirose


The Floppy to USB is an ideal solution for floppy replacements on machines or equipment that originally did not have the USB technology nor upgradable but, are too expensive to replace.  Some example equipment's are CNC machines, [[embroidery equipment]], analysis tools, hospital equipment, logging devices, etc.
*[[Tajima]]
**Parallel
**Serial 25 Pin


==Dimensions==
*[[Toyota]]
[[File:Pin1_location_for_nec_1137_floppy_replacement.jpg|thumb|left|alt=Back of one of the Floppy to USB models|Back of one of the Floppy to USB models]]  
**Serial 9 Pin
The Floppy To USB upgrade is designed to replace most every 3 1/2 floppy disk drive.  The dimensions should be the same as a regular floppy drive and all the screw mounts should also match up to the existing chassis.
**Serial 25 Pin


The "slim" or "laptop" drive is 95mm Wide, 12mm Tall, 132mm Deep (including the face). Or in English, 3 3/4 IN Wide, Less than 1/2 IN Tall, 5 1/4 IN Deep (including the face).
*[[Happy]]
**Small Parallel


The standard drive is 100mm Wide, 25mm Tall, 145mm Deep (including the face). Or in English Less than 4 IN Wide, Less than 1 IN Tall, and Less than 5 3/4 IN Deep (including the face).
*[[SWF]]
**Serial 9 Pin


==Troubleshooting and Known Issues==
==Troubleshooting and Known Issues==
The drives have jumpers that are preset at the distributorship. If the correct USB-XXXX code is used then the drive will plug right in and work without any issues.  However if the drive and jumpers do not match the original drive settings then to check the [http://www.plrelectronics.com/forum/ PLR Electronics Support Site] for the correct settings or any other troubleshooting issues.
The device uses the Tajima DST [[Embroidery software formats|Embroidery software format]].  The designs should follow the standard Tajima Naming convention as mentioned at the [[Embroidery software formats]] page.
 
If the device is causing any issues, first check that all connectors are solid.  When connecting the device to the machine both the machine and the device should be powered off and disconnected from the wall outlet.


Some equipment manufactures decided to produce their own floppy drives or floppy drive housing rather than buying from the major disk drive producers such as IBM or Sony. In these vary rare cases the equipment might have to be slightly modified to accommodate a regular floppy drive. In most every instance, its much cheaper to modify the equipment and upgrade the drive rather than to buy expensive and rare floppy drives that were only made in very short run.
Check the [http://www.plrelectronics.com/forum/ PLR Electronics Support Site] for any other troubleshooting issues.


==Known working Models==
==Known working Models==
The following table contains the Floppy To USB corresponding drives that has been proven to work successfully on the following machines.  If your machine or drive is not on the list, then contact [http://www.PLRElectronics.com: PLR Electronics] and they can tell you exactly what drive to order.
[[File:happy_usb_reader_small.jpg|thumb|right|alt=Happy Embroidery Machine USB reader|Happy Embroidery Machine USB reader]]
[[File:toyota_25pin_connector.jpg|thumb|right|alt=Toyota 25 Pin (9 pin also available) USB Reader|Toyota 25 Pin (9 pin also available) USB Reader]]
 
===List===
The following table contains the Black Box corresponding connector type that has been proven to work successfully on the following machines.  If your machine is not on the list, then contact [http://www.PLRElectronics.com: PLR Electronics] and they can tell you exactly what connect to order.
 
''If your machine has a built in Floppy Drive, see [[FloppyToUSB]]''


<center>
<center>
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
! Machine Model !! USB Upgrade Code
! Machine Model !! Connector Type
|-
| ABB Equipment||USB-A001
|-
| Accu-press 7608 Press Brake||USB-A001
|-
| Accurpress ETS2000||USB-A001
|-
| Accurpress ETS3000 Brake Press ||USB-A001
|-
| Acramatic 2100 ||USB-A001
|-
| Acu-rite Mill||USB-A001
|-
| Addison DB76 ||USB-AYYY
|-
| Aeroflex 2399B Spectrum Analyzer||USB-EYYY
|-
| Aeroflex 6844 Microwave System Analyzer||USB-EYYY
|-
| Aerotech U21||USB-DYYY
|-
| AGIE 200D||USB-DXXX
|-
| AGIE 300D +H||USB-D002
|-
| Agie 350HSS EDM ||USB-D001
|-
| AGIE AC 100D||USB-D002
|-
| AGIE AGIECUT 100D||USB-D002
|-
| Agie CD 300 Wire Eroder ||USB-B002
|-
| AGIE EDM||USB-D001
|-
| AGIE PDM AT-1U||USB-D002
|-
| AGIE Wire Machine||USB-A001
|-
| AGIECUT 100D||USB-D002
|-
| AGIECUT 250HSS||USB-D002
|-
| AGIECUT 250HSS||USB-D002
|-
| AGIEMATIC-C ||USB-D002
|-
| Agilent ||USB-A001
|-
| Agilent 35670A||USB-H005
|-
| Agilent 54621D (Slim Drive)||USB-FXXX
|-
| Agilent 54622D||USB-FXXX
|-
| Agilent 54642A||USB-FXXX
|-
| Agilent 7405A||USB-FXXX
|-
| Agilent 86142B||USB-FXXX
|-
| Agilent 8753D ||USB-FXXX
|-
| Agilent E4402B||USB-FXXX
|-
| Agilent E4403B ||USB-FXXX
|-
| Agilent E4407B ||USB-FXXX
|-
| Agilent E4411B (Slim Drive)||USB-FXXX
|-
| Agilent HP8751A ||USB-D001
|-
| Agilent Infinium 1.5GHz||USB-FXXX
|-
| Akai S01 sampler||USB-D017
|-
| Akai S900||USB-D002
|-
| Allen Bradley ||USB-A001
|-
| Allen Bradley Controller||USB-A001
|-
| ALPS – DFP723D15C||USB-A001
|-
| Alps DF354H090F ||USB-D010
|-
| Alps DF354H121G||USB-D010
|-
| Alps Electronic Co||USB-H009
|-
| Amada Brake Press ||USB-A001
|-
| Amada Brake Press HFE220-4||USB-A001
|-
| Amiga 500||USB-D017
|-
| Anilam 3200MK||USB-A001
|-
| Anilam 4200T||USB-A001
|-
| Anilam 6000M Quantum S1000D||USB-A001
|-
| Anilam Controls||USB-A001
|-
| APB-5620W||USB-D005
|-
| ASM EPI E2000||USB-D001
|-
| ASM Epitaxial Reactor ||USB-B002
|-
| ASM Epsilon chemical vapor deposition system ||USB-D001
|-
| Atari 1040STe ||USB-D002
|-
| Autolink DR1000||USB-A001
|-
| Babylock Ellageo||USB-EXXX
|-
| BabyLock ESG2||USB-EXXX
|-
| Barudan 7XX||BLACK BOX
|-
| Barudan 8XX||BLACK BOX
|-
| Barudan BEAT 900 ('A' Drive)||USB-A001
|-
| Barudan BEAT 900 ('B' Drive)||USB-A005
|-
| Barudan BEDT||USB-B002
|-
| Barudan BEDY, BEVY series||USB-B002
|-
| Barudan BEDYHE||USB-B002
|-
| Barudan BEMS, BEMR, BEM, BEMY, BENT  series||USB-B002
|-
| Barudan BEMX series||USB-JXXX
|-
| Barudan BENS, BEN, BENY series||USB-E004
|-
| Barudan BEVT||USB-B002
|-
| BIESSE ||USB-D013
|-
| Biesse 321 Rover series #93||USB-D013
|-
| BIESSE ROVER 20 ||USB-D013
|-
| Biesse Selco EB110||USB-D013
|-
| Billion Injection Moulding Machines||USB-A001
|-
| Bonas||USB-AYYY
|-
| BOSHERT CNC ||USB-D012
|-
| Bostomatic BD-12 ||USB-D010
|-
| BostoMatic SPCII CNC ||USB-D010
|-
| Bridgeport 812||USB-HYYY
|-
| Bridgeport CNC Torq Cut TC3||USB-A001
|-
| Bridgeport EZTRZC ||USB-A001
|-
| Bridgeport Lathe - EZ-Path||USB-A001
|-
| Bridgeport Mille - EZ Trax DX||USB-A001
|-
| Bridgeport Milling Machine EZ-Trak||USB-A001
|-
| Brother 3100D||USB-EXXX
|-
| Brother AF-110 ||USB-D005
|-
| Brother BAS 300E||USB-A001
|-
| Brother BAS 311A||USB-D002
|-
| Brother BAS 311E||USB-A001
|-
| Brother BAS 311F||USB-A001
|-
| Brother BAS 412||USB-A023
|-
| Brother BAS 415, 416, 423||USB-A018
|-
| Brother BE-0901E-AC||USB-EXXX
|-
| Brother BE-1201B-AC||USB-A018
|-
| Brother BES-120||USB-EXXX
|-
| Brother BES-1210AC||USB-A018
|-
| Brother BES-916AC||USB-A001
|-
|-
| Brother Pacesetter ULT2002D||USB-EYYY
| Barudan BEAT 102||Barudan Hirose
|-
|-
| Brother PR600||USB-EXXX
| Barudan BEAT 106||Barudan Hirose
|-
|-
| Brother ULT2001||USB-EXXX
| Barudan BEAT 702||Barudan Hirose
|-
|-
| Brother ULT2002D||USB-EXXX
| Barudan BEAT 704||Barudan Hirose
|-
|-
| Brother ULT2003D||USB-EXXX
| Barudan BEAT 706||Barudan Hirose
|-
|-
| Burny 3||USB-B008
| Barudan BEAT 802||Barudan Hirose
|-
|-
| Burny 5 FD-235HF||USB-B007
| Barudan BEAT 804||Barudan Hirose
|-
|-
| Bystronic CNC Laser||USB-A001
| Barudan BEAT 806||Barudan Hirose
|-
|-
| Cannon MD3522 ||USB-H026
| Barudan BEAT-IV||Barudan Hirose
|-
|-
| Capod Mill||USB-BYYY
| SWF || 9 Pin Serial
|-
|-
| CEM SPA||USB-D001
| Tajima TMEF||Tajima Parallel
|-
|-
| Centroid M400 ||USB-D012
| Tajima TME-HC||Tajima Parallel
|-
|-
| Centurion control||USB-A001
| Tajima TME-SC||Tajima Parallel
|-
|-
| Charmille Roboform 30/31||USB-D010
| Tajima TME-C||Tajima Parallel
|-
|-
| Charmille Sinker EDM||USB-D010
| Tajima TMEF-HC||Tajima Parallel
|-
|-
| Charmilles 440 cc ||NOTES
|Tajima TMM (Melco control panel)||Tajima Parallel
|-
|-
| Charmilles Robofil 200||USB-D010
|Tajima TMFD ||Tajima Parallel
|-
|-
| Charmilles Robofil 2000||USB-D010
|Tajima TME-DC ||Tajima Parallel
|-
|-
| Charmilles Robofil 2020||USB-B002
| Toyota 800||25 Pin Serial
|-
|-
| Charmilles Robofil 220||USB-D010
| Toyota 820||25 Pin Serial
|-
|-
| Charmilles Robofil 23||USB-B002
| Toyota 820A||25 Pin Serial
|-
|-
| Charmilles Robofil 230||USB-D010
| Toyota 830||25 Pin Serial
|-
|-
| Charmilles Robofil 290||USB-D010
| Toyota 850||9 Pin Serial
|-
|-
| Charmilles Robofil 300||USB-B002
| Toyota 851||9 Pin Serial
|-
|-
| Charmilles Robofil 31||USB-B002
| Toyota 860||9 Pin Serial
|-
|-
| Charmilles Robofil 310  ||USB-B002
| Happy||Small Parallel
|-
| Charmilles Robofil 40||USB-D010
|-
| Charmilles Robofil 400||USB-B002
|-
| Charmilles Robofil 4020||USB-D012
|-
| Charmilles Robofil 440||USB-A001
|-
| Charmilles Robofil 510 WEDM ||USB-D010
|-
| Charmilles Robofil 6020-1||USB-D010
|-
| Charmilles Roboform 20||USB-D002
|-
| Charmilles Roboform 50||USB-D002
|-
| Charmilles Roboform 55 ||USB-D002
|-
| Charmilles Roboform CT200||USB-D010
|-
| Chinon FZ-357||USB-A001
|-
| Cincinatti Arrow 1250C||USB-A001
|-
| Cincinnati VMC-750||USB-A001
|-
| Citizen LR102061||USB-EXXX
|-
| Citizen LR102061 MN||USB-DYYY
|-
| Citizen OSD||USB-DYYY
|-
| Citizen OSDB Floppy Drive ||USB-BYYY
|-
| Citizen OSDB-25C||USB-DYYY
|-
| Citizen OSDB-25G-U||USB-DYYY
|-
| Citizen OSDC-29C ||USB-B002
|-
| CM402 Panasonic equipment ||USB-A001
|-
| Cognex 3100||USB-D007
|-
| Commodore Amiga 500 drive||USB-D017
|-
| Computer or laptop with slim floppy||USB-EXXX
|-
| Computer with regular sized floppy||USB-A001
|-
| Cosmos Machinery International||USB-A001
|-
| Cybelec DNC 80 ||USB-A001
|-
| Daewoo Puma 6s||USB-D002
|-
| Delem CNC Press Brake Control||USB-A001
|-
| Delem DA-24 cnc||USB-B002
|-
| Dinema FDU 2||USB-A001
|-
| DISCO  DFD-651 ||USB-B002
|-
| DISCO DFD-640||USB-B002
|-
| Dornier Air-Jet Loom||USB-A001
|-
| Dornier PTS||USB-A001
|-
| Dynapath Control Panel||USB-A001
|-
| Elecsys 2010 ||USB-D021
|-
| EMI Test Receiver - Rohde & Schwarz||USB-DYYY
|-
| Engel Kempo PFD35||USB-A001
|-
| Engel machines (Rubber Injection Systems)||USB-A001
|-
| Ensoniq ASR-10||USB-D020
|-
| Ensoniq EPS ||USB-D011
|-
| Ensoniq Mirage||USB-D002
|-
| Epson 340||USB-A005
|-
| Epson PC-286UX||USB-H026
|-
| ESAB L-Tec: Avenger 2 plasma Cutter||USB-A001
|-
| ESAB VISION 2000 ||USB-A001
|-
| ESAgv Tria||USB-B002
|-
| ETC Express Stage Lighting controller ||USB-A001
|-
| ETC lighting console ||USB-A001
|-
| ETS3000 Brake Press ||USB-A001
|-
| EZTrak Machines||USB-A001
|-
| Fadal Vertical Machining Center ||USB-A001
|-
| Fadal VMC 3016HT||USB-A001
|-
| FANUC ||USB-A001
|-
| FANUC 16M ||USB-D010
|-
| Fanuc 16P||USB-D010
|-
| Fanuc 180iP ||USB-D010
|-
| FANUC 21M ||USB-D010
|-
| FANUC RG||USB-D001
|-
| Fanuc Series 15-M.||USB-D010
|-
| FANUC X-312 Floppy Reader||USB-B002
|-
| Fardinge VMC600II||USB-A001
|-
| FEIYA ||USB-A001
|-
| Fryer MB-10 ||NOTES
|-
| Fryer Milling Machine||USB-D006
|-
| FSI Mercury Sprayer Machine||USB-A001
|-
| Fujitsu FMR-50 ||USB-HXXX
|-
| Fukuhara F-SEC-UY||USB-B002
|-
| G&L (Giddings and Lewis) CNC Mill||USB-D028
|-
| G&L 8000-B ||USB-D028
|-
| G&L CNC Mill||USB-A001
|-
| GE Electrocardiograph MAC 5000||USB-EXXX
|-
| GEM WK2 Keyboard||USB-A001
|-
| GEM WK8 Keyboard||USB-A001
|-
| GEM WS-400 Piano Workstation||USB-DXXX
|-
| Gespec||USB-A001
|-
| Giddings & Lewis 8000B ||USB-A001
|-
| GNNettest CMA4000 OTDR||USB-EXXX
|-
| Graphics Microsystems, Inc Controller||USB-A001
|-
| Greco||USB-A001
|-
| Greco LC-OEMKT ||USB-A001
|-
| Gyro 20 Compactor ||USB-A001
|-
| HAAS HL2 Lathe||USB-A001
|-
| HAAS Machine||USB-A001
|-
| HAAS Mini Mill||USB-A001
|-
| HAAS SL10 ||USB-A001
|-
| HAAS SL20 Lathe 1999||USB-A001
|-
| HAAS TM-2||USB-A001
|-
| HAAS VF0||USB-A018
|-
| HAAS VF2 Mill||USB-A018
|-
| HAAS VF7 w/ Mitsumi D359T6||USB-D022
|-
| HACO ERM40200 ||USB-D001
|-
| Happy Embroidery Machine||USB-B003
|-
| Hass VF1 with Mitsumi D359T6||USB-D001
|-
| Hass VF3- SS||USB-A018
|-
| Hitachi 345Q EDM ||USB-D010
|-
| Hitachi Analyzer 911||USB-B002
|-
| Hitachi Analyzer 917||USB-B002
|-
| Hitachi Elecsys 2012||USB-B002
|-
| HITACHI MARK 90 CNC DRILLING MACHINE||USB-D010
|-
| Hitachi Roche Elecsys 2010 Rack ||USB-B002
|-
| Holzher Eco Master 7113 CNC ||USB-A001
|-
| Holzma HPP-81||USB-D010
|-
| HOMAG CNC||USB-D005
|-
| Honeywell DL 900 ||USB-A001
|-
| HP 8546A EMI Recievier||USB-D001
|-
| HP Agilent 0950-2782||USB-EXXX
|-
| HP8751A Agilent||USB-D001
|-
| Hurco BMC - 20||USB-A001
|-
| Hurco BMC - 2416||USB-A001
|-
| Hurco CNC||USB-A001
|-
| Hurco Ulitmax III ||USB-A001
|-
| Hurco VM1||USB-A001
|-
| Husqvarna Designer ||USB-EXXX
|-
| Hypertherm EDGE Oxifuel Cutting Machine CNC||USB-A001
|-
| IBM Drive||USB-A001
|
|-
| Tajima TMEF||BLACK BOX
|-
| Tajima TME-HC||BLACK BOX
|-
| Tajima TME-SC||BLACK BOX
|-
| Toyota 820||BLACK BOX
|-
| Toyota 820A||BLACK BOX
|-
| Toyota 830||BLACK BOX
|-
| Toyota 850||BLACK BOX
|-
| Toyota 851||BLACK BOX
|}</center>
|}</center>
===Reader Replacements===
This USB reader is the idea solution for operators looking to replace devices like:
*Tajima TFD reader / TFD II disk reader
*Barudan FMC & FMCII
*EDS Software
*Toyota Software
*Richpeace Readers
*QDT Software (Quick Design Transfer)
*Nova disk reader
*Read-I disk reader
*Alpha disk reader
*USB LINKER
*Embroidery Transfer Software
*and others


==See also==
==See also==
*[[FloppyToUSB]]
*[[Floppy To USB]]


==References==
==References==
{{Reflist|2}}
<!--{{Reflist|2}}-->


==External links==
==External links==
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com: PLRElectronics.com]
*''[[TheEmbroideryWarehouse]]'' - [http://www.TheEmbroideryWarehouse.com TheEmbroideryWarehouse.com]
*''[[PLRElectronics]]'' - [http://www.plrelectronics.com/3-and-A-Half-USB-Reader-Manual.pdf: Floppy To USB Manual]
*''[[Floppy To USB]]'' - [http://www.FloppyToUSB.com Floppy To USB Convertor]
*''[[FloppyToUSB]]'' - [http://www.FloppyToUSB.com: Floppy To USB Convertor]
*''[[EMBAccess]]'' - [http://www.embroiderybids.com/cart/USB-Flash-Reader-Embroidery-Machine-transfer-system.html USB Reader Transfer System]

Latest revision as of 16:05, 2 October 2013

External USB-based Embroidery Design Reader
External USB-based Embroidery File Design Reader

The Embroidery Black Box is a device that reads USB sticks containing embroidery design files. The design files are transferred to embroidery machines via parallel or serial cables connected to the embroidery machine's data input port. The device is distributed by TheEmbroideryWarehouse and can be purchased at EMBAccess. The Black Box is the ideal solution for older embroidery machines without a built-in floppy disk drive. The device is "plug-and-play" in that it requires no software or drivers for installation.

Various cable connectors are available with the Black Box to suit a range of embroidery machines, but the device is sold with one connector.

History and sales

Error creating thumbnail: Unable to save thumbnail to destination
This device is MADE IN THE USA!

The Embroidery Black Box was introduced to the market around 2008. The device was created to meet market demand for a low-cost alternative to expensive external embroidery machine floppy drive readers. The device is sold and used around the world.

The Embroidery Black Box is also Made and Developed In The USA and is the only device of its kind Made and Developed In The USA.

The device is the only solution for Toyota embroidery machines besides direct PC connect.

The device can be purchased at http://www.embroiderybids.com/cart/USB-Flash-Reader-Embroidery-Machine-transfer-system.html

This USB Linker to embroidery machines is the ONLY USA made device on the market. This device also supports more machines than any other similar device on the market.

The distributor of this device claims we will meet or beat any competitors invoice price and or warranty.

Connectors

Barudan adapter Hirose
Barudan adapter Hirose

The Black Box device supports both parallel (8-PTR) and serial (RS232C) interfaces. However, there are various types of connectors depending on the model of embroidery machine. Each connector is for a different type of machine input port.

The device works on the following embroidery machines: Barudan, Tajima, SWF, Happy, Toyota

The connectors available are:

  • Toyota
    • Serial 9 Pin
    • Serial 25 Pin
  • SWF
    • Serial 9 Pin

Troubleshooting and Known Issues

The device uses the Tajima DST Embroidery software format. The designs should follow the standard Tajima Naming convention as mentioned at the Embroidery software formats page.

If the device is causing any issues, first check that all connectors are solid. When connecting the device to the machine both the machine and the device should be powered off and disconnected from the wall outlet.

Check the PLR Electronics Support Site for any other troubleshooting issues.

Known working Models

Happy Embroidery Machine USB reader
Happy Embroidery Machine USB reader
Toyota 25 Pin (9 pin also available) USB Reader
Toyota 25 Pin (9 pin also available) USB Reader

List

The following table contains the Black Box corresponding connector type that has been proven to work successfully on the following machines. If your machine is not on the list, then contact PLR Electronics and they can tell you exactly what connect to order.

If your machine has a built in Floppy Drive, see FloppyToUSB

Machine Model Connector Type
Barudan BEAT 102 Barudan Hirose
Barudan BEAT 106 Barudan Hirose
Barudan BEAT 702 Barudan Hirose
Barudan BEAT 704 Barudan Hirose
Barudan BEAT 706 Barudan Hirose
Barudan BEAT 802 Barudan Hirose
Barudan BEAT 804 Barudan Hirose
Barudan BEAT 806 Barudan Hirose
Barudan BEAT-IV Barudan Hirose
SWF 9 Pin Serial
Tajima TMEF Tajima Parallel
Tajima TME-HC Tajima Parallel
Tajima TME-SC Tajima Parallel
Tajima TME-C Tajima Parallel
Tajima TMEF-HC Tajima Parallel
Tajima TMM (Melco control panel) Tajima Parallel
Tajima TMFD Tajima Parallel
Tajima TME-DC Tajima Parallel
Toyota 800 25 Pin Serial
Toyota 820 25 Pin Serial
Toyota 820A 25 Pin Serial
Toyota 830 25 Pin Serial
Toyota 850 9 Pin Serial
Toyota 851 9 Pin Serial
Toyota 860 9 Pin Serial
Happy Small Parallel

Reader Replacements

This USB reader is the idea solution for operators looking to replace devices like:

  • Tajima TFD reader / TFD II disk reader
  • Barudan FMC & FMCII
  • EDS Software
  • Toyota Software
  • Richpeace Readers
  • QDT Software (Quick Design Transfer)
  • Nova disk reader
  • Read-I disk reader
  • Alpha disk reader
  • USB LINKER
  • Embroidery Transfer Software
  • and others

See also

References

External links

Retrieved from "http://wiki.embroiderymachine.com/index.php?title=Embroidery_Black_Box&oldid=3919"