Embroidery Black Box
The Embroidery Black Box is a device that reads USB sticks containing embroidery design files. The device connects to embroidery machines with external data input ports. To device is sold by TheEmbroideryWarehouse and can be purchased at EMBAccess. The Black Box is the ideal solution for older embroidery machines without a built-in floppy disk drive. The device is "plug-and-play" in that it requires no software or drivers for installation.
The Black Box device is sold with one connector. The connectors are interchangeable and are easy to change.
History and sales
The Embroidery Black Box was introduced to the market around 2008. The device was created to meet market demand for a low-cost alternative to expensive external embroidery machine floppy drive readers. The device is sold and used around the world.
The Embroidery Black Box is also Made and Developed In The USA and is the only device of its kind Made and Developed In The USA.
The device is the only solution for Toyota embroidery machines besides direct PC connect.
Connectors
There are several different types of connectors available for the Embroidery Black Box. Each connector is for a different type of machine input port.
- Barudan
- Hirose
- Tajima
- Parallel
- Serial 25 Pin
- Toyota
- Serial 9 Pin
- Serial 25 Pin
- SWF
- Serial 9 Pin
Troubleshooting and Known Issues
The device uses the Tajima DST Embroidery software format. The designs should follow the standard Tajima Naming convention as mentioned at the Embroidery software formats page.
If the device is causing any issues, first check that all connectors are solid. When connecting the device to the machine both the machine and the device should be powered off and disconnected from the wall outlet.
Check the PLR Electronics Support Site for any other troubleshooting issues.
Known working Models
The following table contains the Black Box corresponding connector type that has been proven to work successfully on the following machines. If your machine is not on the list, then contact PLR Electronics and they can tell you exactly what connect to order.
If your machine has a built in Floppy Drive, see FloppyToUSB
| Machine Model | Connector Type |
|---|---|
| Barudan BEAT 102 | Barudan Hirose |
| Barudan BEAT 106 | Barudan Hirose |
| Barudan BEAT 702 | Barudan Hirose |
| Barudan BEAT 704 | Barudan Hirose |
| Barudan BEAT 706 | Barudan Hirose |
| Barudan BEAT 802 | Barudan Hirose |
| Barudan BEAT 804 | Barudan Hirose |
| Barudan BEAT 806 | Barudan Hirose |
| Barudan BEAT-IV | Barudan Hirose |
| SWF | 9 Pin Serial |
| Tajima TMEF | Tajima Parallel |
| Tajima TME-HC | Tajima Parallel |
| Tajima TME-SC | Tajima Parallel |
| Tajima TME-C | Tajima Parallel |
| Tajima TMEF-HC | Tajima Parallel |
| Tajima TMM (Melco control panel) | Tajima Parallel |
| Tajima TMFD | Tajima Parallel |
| Tajima TME-DC | Tajima Parallel |
| Toyota 800 | 25 Pin Serial |
| Toyota 820 | 25 Pin Serial |
| Toyota 820A | 25 Pin Serial |
| Toyota 830 | 25 Pin Serial |
| Toyota 850 | 9 Pin Serial |
| Toyota 851 | 9 Pin Serial |
| Toyota 860 | 9 Pin Serial |
| Happy | Small Parallel |
See also
References
| references-column-width
| references-column-count references-column-count-{{#if:1|2}} }}
| {{#if:
| references-column-width }} }}" style="{{#if: 2
| {{#iferror: {{#ifexpr: 2 > 1 }}
| -moz-column-width: {{#if:1|2}}; -webkit-column-width: {{#if:1|2}}; column-width: {{#if:1|2}};
| -moz-column-count: {{#if:1|2}}; -webkit-column-count: {{#if:1|2}}; column-count: {{#if:1|2}}; }}
| {{#if:
| -moz-column-width: {{{colwidth}}}; -webkit-column-width: {{{colwidth}}}; column-width: {{{colwidth}}}; }} }} list-style-type: {{#switch:
| upper-alpha
| upper-roman
| lower-alpha
| lower-greek
| lower-roman = {{{group}}}
| #default = decimal}};">
<references group=""></references>